Panasonic KX-FP143HK Code #26 Setting the Caller ID list to print automatically

Page 38

7. Programmable Features

9.Enter the transmission start time.

10.Press {SET}.

11.Press {MENU}.

Note:

LTo cancel after programming, press {STOP} then {SET}.

Code #26: Setting the Caller ID list to print automatically

AUTO CALL. LIST

=OFF [±]

“ON”: The unit will print the Caller ID list automatically after every 30 new calls (page 19). “OFF” (default): The unit will not print the Caller ID list, but keep records of the information for the last 30 callers.

Code #27: Setting the black list function

BLACK LIST

=OFF [±]

See page 30 for details.

Code #31: Activating the Distinctive Ring feature

DISTINCTIVE RING

=OFF [±]

See page 31 for details.

Code #34: Setting the quick scan

QUICK SCAN

=OFF [±]

This feature is helpful when you want to remove the document for other uses, because the unit will release the document before sending or copying.

“ON”: The unit will scan the document and store it into memory first, then the unit will start sending or copying.

“OFF” (default): Deactivates this feature.

Note:

LIf the document exceeds the memory capacity, sending of the whole document or copying of the exceeded document will be cancelled and this feature will be turned OFF automatically.

Code #36: Receiving oversized documents

RCV REDUCTION

=92% [±]

If the size of the document sent by the other party is as large as, or larger than the recording paper, the unit can reduce the document and print it. Select the desired reduction rate.

Setting

Recording

Original

 

paper size

document

 

 

size

100%

A4

Letter

 

 

 

92%

A4

A4

(default)

 

 

 

 

 

86%

A4

A4

 

 

 

72%

A4

Legal

 

 

 

Code #39: Changing the display contrast

LCD CONTRAST

=NORMAL [±]

“NORMAL” (default): For normal contrast.

“DARKER”: Used when the display contrast is too light.

Code #41: Changing the fax activation code

FAX ACTIVATION

=ON[±]

If you use an extension telephone and wish to use it to receive a fax, activate this feature and program the activation code.

1.Press {MENU}.

2.Press {#}, then {4}{1}.

3.Press {A} or {B} repeatedly to select “ON”.

4.Press {SET}.

5.Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.

L The default code is “@@@9”. L Do not enter “0000”.

6.Press {SET}.

7.Press {MENU}.

Note:

LThis code is also used to receive a voice message and a fax in the same call (page 30).

Code #44: Setting the memory reception alert

RECEIVE ALERT

=ON[±]

To alert you with a beeping sound when a received fax document is stored into memory due to some existing problem.

The slow beeps will continue until you clear the printing problem and make sure the unit is supplied with enough paper to print the stored document.

“ON” (default): You will be alerted to a reception problem by a beeping sound.

“OFF”: Deactivates this feature.

36

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Operating Instructions How to use the operating instructions OpenLocation of Controls Keys Listed in alphabetical orderCopyright Thank you for purchasing a Panasonic fax machineFor your future reference Never install telephone wiring during a Lightning storm Important safety instructionsInstallation Wet locationsFor best performance Directory On another fax machineIncluded accessories Quantity SpecificationsModel No Specifications/Usage Accessory informationAvailable accessories Film againOverview Description of buttonsInstalling the ink film Ink filmReplacing the ink film Turn TightRecording paper Handset cordPaper tray Connect the handset cordPush the tension plate back SET Help ConnectionsHelp function Handset receiver volume Adjusting volume Date and timeRinger volume Monitor volumeStop Menu Mute Your logoTo correct a mistake To select characters with the dial keypad Keys CharactersHyphen button To select characters using a or BKeys Characters Insert buttonYour FAX no Press SET Your fax numberStop Menu Example +234Stop Menu Editing a stored itemErasing a stored item Helpful hintsTo confirm caller information using the Caller ID list Making a phone call using the navigator directoryCaller ID service How Caller ID is displayedStop Monitor FAX/START SET Viewing and calling back using caller informationCalling back will not be possible in the following cases To change the display of the caller informationErasing specific caller information Editing a caller’s telephone number before calling backErasing all caller information This feature is not available in the following cases Storing caller information into the navigator directoryFAX/START Monitor Sending a fax manuallyRedial Documents you can send Programming items into the broadcast memory Sending a fax using the navigator directoryBroadcast transmission Adding a new item into the broadcast memorySending the same document to pre-programmed parties To cancel broadcast transmissionErasing a stored item from the broadcast memory To send the same document to a one-time group of partiesMostly phone calls Selecting the way to use your fax machineUse only as a fax With answering machineStop FAX/START Activating TEL modeReceiving a fax manually Auto Answer OFF FAX only Mode Using the unit with an answering machineActivating FAX only mode Auto Answer indicator turns onTo erase a programmed phone number Black list functionReceiving a voice message and fax document in one call Press Menu Press # then Press a or B to select on Press SET Using with the ring detection featureSET Menu Stop Start More copying featuresMaking a copy Collated pages Uncollated pages To collate multiple copiesExample Making 2 copies of a 4-page original document To cancel programming Programming basic featuresProgramming advanced features ProgrammingBasic features Advanced featuresCode #31 Activating the Distinctive Ring feature Code #26 Setting the Caller ID list to print automaticallyCode #27 Setting the black list function Code #34 Setting the quick scanCode #68 Setting the Error Correction Mode ECM Code #46 Setting friendly receptionCode #58 Setting the original mode Code #76 Setting the connecting toneDirect commands for programming features Program code and direct command button#80 Reset advanced features #58 Original mode#76 Connecting tone #46 Friendly receptionError messages Reports Error messages DisplayClose Tension Plate Modem ErrorPolling Error Cover OpenGeneral When a function does not work, check hereInitial settings Fax sending Fax receivingCopying Using an answering machineIf a power failure occurs Display will show the following When the recording paper has jammed in the unitRecording paper jams Correct When the recording paper was not fed into the unit properly Open the back cover Recording paper feeder cleaningDocument jams sending Open the recording paper feeder cover Document feeder/scanner glass cleaningDo not use paper products, such as paper towels or tissues Thermal head cleaning Help Reference lists and reports Technical data about this product Paper specifications Recording paper sizeIndex Index Page Page Page Panasonic Communications Malaysia Sdn. Bhd PFQX2002ZA CM1203DH0
Top Page Image Contents