
Setup
Toner cartridge and drum unit!
Caution:
●Read the instructions below before you begin installation. After you have read them, open the drum unit protection bag. The drum unit contains a photosensitive drum. Exposing it to light may damage the drum. Once you have opened the protection bag:
—Do not expose the drum unit to light for more than 5 minutes.
—Do not touch or scratch the green drum surface.
—Do not place the drum unit near dust or dirt, or in a high humidity area.
—Do not expose the drum unit to direct sunlight.
●Do not leave the toner cartridge out of the protection bag for a long time. It will decrease the toner life.
1 | Before opening the protection bag of |
the new toner cartridge, shake it |
vertically more than 5 times.
2 | Remove the toner cartridge and drum |
unit from the protection bags. Peel off | |
| the seal from the toner cartridge (#). |
| Remove the protection bar from the |
| drum unit ($). |
3 | With “Panasonic” face up on the |
toner cartridge, match the red arrows |
on the cartridge and the drum unit.
4 | Slide the tab on the toner cartridge |
into the slot of the drum unit. |
5 | Firmly press down on the right side of |
the toner cartridge to snap into |
position.
1 Seal | 2 Protection bar |
Toner | Drum unit |
cartridge | |
| Hold here. |
| Toner |
| cartridge |
Red arrows | Green drum |
| |
| surface |
Drum unit | |
| Tab |
| Slot |
14