Receiving Faxes
TEL mode!
(answering all calls manually)
Activating TEL mode
If the FAX ON light is on, turn it off by pressing
PQ.
Display:
TEL MODE
Receiving a fax manually
1 | When the unit rings, lift the handset to |
answer the call. |
2 When: | STOP | |
FAX START | ||
— document reception is required, | ||
— a fax calling tone (slow beep) is heard, or | OFF | |
— no sound is heard, |
| |
press i. |
|
CONNECTING.....
3 Replace the handset.
●The unit will start fax reception.
Note:
●If you do not answer the call within 10 rings, the unit will temporarily switch to fax reception. The other party can then send a fax.
To stop receiving
Press {.
Auto reduction feature
If the other party sends a document that is longer than your recording paper, your unit will reduce the receiving document to the proper size and print it. If you want to print the original size, set feature #37 to off (p. 61).
Fax reception in memory
When a printing problem is detected, the unit will temporarily store the received document into memory. While the document is in memory:
—The display will show an error message and the following alternately.
FAX IN MEMORY
—Slow beeps will sound if feature #44 is set to on (p. 61).
●Follow the instructions on pages 64 and 65 to solve the problem.
●For memory capacity, see page 78.
42