EN
12 Service
Changing the Toner Cartridge
Use only original consumable materials. These are available from a specialised retailer or through our order service (see back side of this user manual). Oth- er consumable materials can cause damage to the de- vice.
Follow the instructions on the packaging of the con- sumable materials.
Before you can receive documents, make copies, or print, a toner cartridge must be inserted into the device. For this reason, a starter cartridge is supplied with the device. The toner level memory for this starter cartridge was set at the factory. The starter cartridge need not be updated with a Plug’n’Print card. For each additional toner cartridge that you insert into your device, you must update the toner lev- el memory with the Plug’n’Print card provided.
1Open the cover by taking hold of both document guides and tipping the cover backward.
2Remove the old toner cartridge, by gripping it at the re- cess in the middle and pulling it upward.
Carefully remove the toner cartridge from the de- vice so that no toner dust spills out. Take care where you place the toner cartridge, escaping ton- er dust may soil the surface.
Store opened or used toner cartridges in their original packing or in a plastic bag in order to pre- vent toner dust from escaping. Dispose of old toner cartridges by turning them in at specialised shops or at a waste collection site. Never dispose of toner cartridges by throwing them into fire. Toner cartridges should never be allowed into the hands of children.
Never open a toner cartridge. If toner dust is re- leased into the air, you should avoid allowing it to contact your skin and eyes. Do not inhale the re- leased toner dust. Remove the toner dust from clothing or objects with cold water; hot water would only cause the toner to set.
3Take the new toner cartridge from the package.
4Remove the black protective foil and other packaging material, but do not yet remove the protective strip from the cartridge.
5Shake the new toner cartridge back and forth several times in order to distribute the toner evenly, thereby improving the print quality.
6Only after completely pull off the protection strip lo- cated on the left side of the cartridge.
Once you have removed the protection strip, do not shake the toner cartridge any more. Other- wise, it is possible that toner dust will be released into the air.
7Place the toner cartridge into your device. The cartridge should snap securely into position.
8Close the cover. Make sure that the cover snaps securely into position on both sides.
9NEW CARTRIDGE? appears on the display. Confirm with OK.
30 | Philips LPF 920 · 925 · 935 · 940 |