14 Appendix
Technical Data
Dimensions (L¦×¦H¦×¦W) | ...................370¦×¦200¦×¦330¦mm | |
Weight | 7,25¦kg | |
Power Supply | ||
Power Consumption |
|
|
<¦8,5¦W | ||
Transmission | <¦17¦W | |
Reception | <¦20¦W | |
Recommended Ambient Temperature | ||
Relative humidity | ||
Type of connection | PSTN · PABX |
Standards
Safety | |
Emissions | EN¦55022 Class B |
............................................................ | |
............................................................ | |
Immunity to electrical noise | EN¦55024 |
Scanner
Type | |
Scan width | 210¦mm |
Horizontal resolution | 8 dots/mm |
Vertical resolution | Standard: 3,85 lines/mm |
..................................................... | Fine: 7,7 lines/mm |
................................................. | SFine: 15,4 lines/mm |
Speed | 6 |
Printer
Type | Class 1 Laser Printer |
approx. 15 seconds | |
Breadth | 200¦mm |
Resolution | 600¦dpi |
Speed | up to 16 pages/minute |
Memory
Telephone book | .................................... up to 200 entries |
Fax messages | up to 100 pages (standard test letter) |
(LPF¦920, LPF¦925, LPF¦935) | |
......... up to 400 pages (standard test letter) (LPF¦940) | |
SMS messages | up to 30 SMS messages |
Paper
Capacity | 250 sheets |
Size | A4 · 210¦×¦297¦mm |
Thickness | |
Weight |
Document Feeder
Capacity | 20 sheets |
Breadth | 218¦mm |
Length | 600¦mm |
Fax
Type | Group 3 |
Compatibility | |
Data compression | MH · MR · MMR |
Transmission speed | 14.400¦bps |
Copier |
|
| |
|
| ||
Type | EN | ||
Resolution | Fast: 200¦×¦200¦dpi | ||
| |||
................................................ | Quality: 400¦×¦200¦dpi |
| |
.................................................. | Photo: 400¦×¦200¦dpi |
| |
Multiple Copies | up to 99 pages |
| |
|
| ||
(LPF¦935, LPF¦940) |
|
| |
Type of connection | USB 1.1 · USB 2.0 Full Speed |
| |
Supported Operating Systems |
| ||
.....................Windows 2000 (SP¦3) · ME · XP · Vista |
|
Technical specifications subject to change with- out notice.
Guarantee
(Terms and Conditions for United King- dom only)
In order to supply the guarantee, you should contact your dealer or Sagem Communications Helpdesk. The proof of purchase will be required.
Please make usage of your equipment for the purpose for which it was designed and under normal usage conditions. Sagem Communications do not accept any liability for any usage made out of the frame of its original designed pur- pose and any consequence that may arise from this usage.
Should any malfunctioning arise, the dealer or Sagem Communications Helpdesk will advise you what to do.
A) General Guarantee conditions
Sagem Communications undertakes to remedy by repair or exchange at its own convenience, free of charge for la- bour and replacement parts, any defects in the equipment during the guarantee period of 12
Unless the customer has concluded with Sagem Commu- nications a maintenance contract in respect of the equip- ment which specifically provides for repairs to be carried out at the customer's premises, the repairs will not be car- ried out on the equipment at the customer premises. The customer must however return the defective equipment at his/her own expense, to the address given by the dealer or Sagem Communications Helpdesk.
In case a product needs to be sent in for a repair, it always has to be accompanied by a proof of purchase (which is not altered, written on or in any way be made illegible) show- ing that the product is still under warrantee. In case no proof of purchase is enclosed, the Sagem Communications repair center will use the production date as a reference of establishing the warrantee status of the product.
Appendix | 37 |