3Press the paper down until the lever (A) snaps into place at the rear of the paper tray.
4Place the cover back on the paper tray. Push the paper tray into the device all the way to the stopping point.
Connecting the Telephone Hand- set
(LPF¦925, LPF¦935)
Plug one end of the spiral cable into the socket on the tel- ephone handset. Insert the other end into the socket desig- nated with the ) symbol.
EN
Do not pull out the paper tray while the device is in the process of printing. This can lead to a paper jam.
Extending the Printout and Fax Outlet Tray
Pull the
Attaching the Document Outlet Tray
Insert the document outlet tray into the two openings un- der the operation panel.
Inserting Starter Cartridge
Before you can receive documents, make copies, or print, a toner cartridge must be inserted into the device. For this reason, a starter cartridge is supplied with the device. The toner level memory for this starter cartridge was set at the factory. The starter cartridge need not be updated with a Plug’n’Print card. For each additional toner cartridge that you insert into your device, you must update the toner lev- el memory with the Plug’n’Print card provided.
1Open the cover by taking hold of both document guides and tipping the cover backward.
Never open a toner cartridge. If toner dust is re- leased into the air, you should avoid allowing it to contact your skin and eyes. Do not inhale the re- leased toner dust. Remove the toner dust from clothing or objects with cold water; hot water would only cause the toner to set.
2Take the new toner cartridge from the package.
3Remove the black protective foil and other packaging material, but do not yet remove the protective strip from the cartridge.
4Shake the new toner cartridge back and forth several times in order to distribute the toner evenly, thereby improving the print quality.
Initial Operation | 9 |