3Carefully pull out the paper.
EN
In case of a paper jam, do not forcefully remove the paper, but rather pull it gently out of the de- vice and throw it away carefully. It is possible that the toner may not be completely set on the print- out, and toner dust could be released into the air. Do not inhale the released toner dust. Remove the toner dust from clothing or objects with cold water; hot water would only cause the toner to set.
4Reinsert the toner cartridge and close the cover. Make sure that the cover snaps securely into position on both sides.
If the toner level of the cartridge is low, then every time you open and close the cover, the following question will appears on the display: BLACK=NEW?. If you have not installed a new cartridge, press j. Whenever you have installed a new toner cartridge, press OK, and update the toner level memory (also see chapter Changing the Toner Cartridge, page 30).
Fixing a Document Jam
If a document jam should occur in the front area:
1Lift the panel upwards until it snaps into position.
2Carefully pull the paper or document forwards until it is released.
3Close the panel.
Cleaning
Unplug the device from the power socket before cleaning it. Use a soft,
Special fax cleaning sheets are available as accessories from our call centre. Insert a sheet into the document feeder. Press j; the page is ejected. Repeat this proc- ess at a few times.
1Lift the panel upwards until it snaps into position.
2Wipe the scanner glass with a soft, dry and
3Close the panel.
Power Cycling
If a problem occurs that cannot be corrected with the in- structions in this user manual (see also the help below), fol- low the steps given here.
1Pull out the power plug.
2Wait at least ten seconds, then plug the power plug back into the socket.
3If the problems repeats, please contact our technical customer service or your retailer. Follow the instruc- tions on the display.
32 | Philips LPF 920 · 925 · 935 · 940 |