10 Wait until INSERTCARD appears on the display. Push the Plug’n’Print card of the new toner cartridge into the opening on the left side next to the paper tray, with the contacts facing to the left.
Should the error message UNREADABLECARD appear on the display, you may have inserted the Plug’n’Print card incorrectly. The contacts must face to the left as you insert the card into the de- vice.
11 It may take a moment to update the cartridge. When the process is completed, the following appears on the display: ACTION COMPLETED / EJECT CARD.
12 Pull the Plug’n’Print card out of the device.
You can interrupt the recharging process at any time, by pressing j. However, the toner level memory must be updated for each new toner car- tridge.
Restart the Recharging Process
1Press OK, 62 and OK.
2Using [ select NEW BLACK.
3Confirm with OK.
4Using [select YES. After a short time, the device will ask you to insert the Plug’n’Print card.
If the toner level of the cartridge is low, then every time you open and close the cover, the following question will appears on the display: BLACK=NEW?. If you have not installed a new car- tridge, press j. If you have installed a new cartridge, press OK and follow the description set forth above.
Displaying the Toner Level
Whenever you insert a new toner cartridge, you must update the toner level memory of your device with the Plug’n’Print card that is included with the new cartridge. Your device registers the extent of toner us- age for every
1Press OK, 62 and OK.
2Select with [CART CAPACITY.
3Confirm with OK. The toner level of the toner car- tridge is indicated by a percentile value between 100 percent (full) and 0 percent (empty).
Fixing a Paper Jam
Your device is equipped with sensors that quickly recognise a paper or document jam. If trouble of this sort arises, the feeding of the printer paper or document is stopped imme- diately.
1Open the cover by taking hold of both document guides and tipping the cover backward.
2It is possible that you will have to remove the toner car- tridge in order to reach the paper.
Carefully remove the toner cartridge from the de- vice so that no toner dust spills out. Take care where you place the toner cartridge, escaping ton- er dust may soil the surface.
EN
Service | 31 |