Samsung Guide to Configuring Printer IP Settings for SCX-4623 Series Printers
Page 36

•MAC Address:00:15:99:41:A2:78

•IP Address:192.0.0.192

Setting IP address

First, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network.

In a few situations the IP address must be set manually. This is called a static IP and is often required in corporate Intranets for security reasons.

•DHCP IP assignment: Connect your machine to the network, and wait a few minutes for the DHCP server to assign an IP address to the machine. Then, print the Network Configuration Report as explained above. If the report shows that the IP address has changed, the assignment was successful. You will see the new IP address in the report.

•Static IP assignment: Use SetIP program to change the IP address from your computer. If your machine has a control panel, you can also change IP address using the machine's control panel.

In an office environment, we recommend that you contact a network administrator to set this address for you.

IP setting using control panel

1.Connect your machine to the network with a network cable.

2.Turn on the machine.

3.Press Menu on the control panel.

4.Press the left/right arrow until Network appears and press OK.

5.Press the left/right arrow until TCP/IP (IPv4) appears and press OK.

6.Press the left/right arrow until Static appears and press OK.

7.Press the left/right arrow until IP Address appears and press OK.

8.Enter the IP address using numeric keypad and press OK.

Enter a byte between 0 and 255 using the number keypad and press the left/right arrow to move between bytes.

Repeat this to complete the address from the 1st byte to the 4th byte.

9.Enter other parameters, such as the Subnet Mask and Gateway appears and press OK.

10.After entering all parameters, press Stop/Clear to return to ready mode.

Now go to "Installing wired network or USB connected machine’s driver" on page 37.

IP setting using SetIP Program (Windows)

This program is for manually setting the network IP address of your machine using its MAC address to communicate with the machine. A MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report.

For using SetIP program, disable the computer firewall before continuing by performing the following:

1.Open Control Panel.

2.Double click Security Center.

3.Click Windows Firewall.

4.Disable the firewall.

Installing the program

1.Insert the Printer Software CD-ROM provided with your machine. When the driver CD runs automatically, close that window.

2.Start Windows Explorer and open the X drive (X represents your CD-ROM drive).

3.Double-clickApplication > SetIP.

4.Double-click Setup.exe to install this program.

5.Select a language, then click Next.

6.Follow the instructions in the window and complete the installation.

Starting the program

1.Connect your machine to the network with a network cable.

2.Turn on the machine.

3.From the Windows Start menu, select All Programs > Samsung Printers > SetIP > SetIP.

4.Click on the icon (third from left) in the SetIP window to open the TCP/IP configuration window.

5.Enter the machine’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding.

•MAC Address: Find the machine’s MAC address from the Network Configuration Report and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8.

•IP Address: Enter a new IP address for your printer.

For example, if your computer’s IP address is 192.168.1.150, enter 192.168.1.X (X is number between 1 and 254 other than the computer’s address).

•Subnet Mask: Enter a Subnet Mask.

•Default Gateway: Enter a Default Gateway.

6.Click Apply, and then click OK. The machine will automatically print the Network Configuration Report. Confirm that all the settings are correct.

7.Click Exit to close the SetIP program.

8.If necessary, restart the computer’s firewall.

IP setting using SetIP Program (Macintosh)

For using SetIP program, disable the computer firewall before continuing by performing the following:

1.Open System Preferences.

2.Click Security.

3.Click the Firewall menu.

4.Turn firewall off.

Network setup_ 36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Multi Functional Printer Copyright CopyrightContent ContentEntering characters using the number keypad Using the save modesSetting the default tray and paper Setting job timeout Preparing originals Loading originalsUsing help Using special print features Basic copy Changing the settings for each copyDeciding the form of copy output Setting copy timeout Using Samsung Scan ManagerPreparing to fax Using a fax in your computer Adjusting the document settingsSetting up address book Printing sent fax report automatically Fax setupUsing the Smart Panel program Using SetIP programUsing the Linux Unified Driver Configurator Solving other problemsHow to purchase Hardware specificationsSafety information Important Safety SymbolsSafety information Operating EnvironmentOperating Method Installation / Moving Maintenance / CheckingSupply Usage Laser Safety Statement Ozone SafetyRegulatory information Perchlorate WarningPower Save RecyclingCorrect Disposal of Batteries in this Product Taiwan only Radio Frequency Emissions Russia onlyFCC Information to the User Canadian Radio Interference RegulationsGermany only FAX Branding Ringer Equivalence NumberYou should also know that Replacing the Fitted Plug for UK only Declaration of Conformity European CountriesImportant warning Approvals and CertificationsOpenssl License Original Ssleay LicenseEC Certification China only About this user’s guide ConventionAbout this user’s guide Convention Description ExampleFinding More Information Material Name DescriptionSamsung website DownloadableFeatures of your new product Special FeaturesFeatures of your new product Features by Models FeaturesPrint Duplex 2-sided printing manual Copy Introduction Machine OverviewFront view IntroductionRear view Control Panel Overview SCX-4623 Series Control Panel Overview SCX-4600 Series Scan toUnderstanding the Status LED Introducing the Useful ButtonsTurning on the Machine Setting UP the Hardware Getting startedSupplied Software Getting startedContents System RequirementsWindows MacintoshInstalling USB Connected MACHINE’S Driver LinuxRequirements Installing the Unified Linux Driver Installing the SmartPanelOpen the Applications folder Utilities Print Setup Utility Select Uninstall and click UninstallInstalling the Printer Setting Utility Setting up a host computerSetting up a client computer Sharing Your Machine LocallySelect Share this printer Network setup Using a Wired NetworkNetwork Environment Introducing Useful Network ProgramsSetting IP address IP setting using control panelIP setting using SetIP Program Windows IP setting using SetIP Program MacintoshInstalling Wired Network or USB Connected MACHINE’S Driver Network parameter settingRestoring factory default settings IP setting using SetIP Program LinuxSearch again Direct InputHelp Set IP AddressIPV6 Configuration Setting IPv6 addressesInstall Linux Driver and add network Printer Activating IPv6Connecting SyncThru Web Service DHCPv6 address configuration StatefulManual address configuration Basic setup Altitude AdjustmentSetting the Date and Time Changing the Clock ModeChanging the Default Mode Setting SoundsEntering Characters Using the Number Keypad Using the Save Modes Setting the Default Tray and PaperSetting JOB Timeout Media and tray Preparing OriginalsLoading Originals On the scanner glassMedia sizes supported in each mode Selecting Print MediaChanging the Tray Size Document feederLoading Paper in the Tray TrayManual tray Tips on using the manual tray Printing on Special MediaTypes Tray Manual Tray Envelope TransparencyLabels Pressure leverSetting the Paper Size and Type Using the Output Support Stacking papers firmlyGetting the small sized printout Printer Driver Features PrintingBasic Printing Printer driverUsing Help Using Special Print FeaturesCanceling a print job Using a favorite settingPrinting multiple pages on one sheet of paper Printing postersPrinting booklets Manual Printing on both sides of paper ManualUsing watermarks Using overlayChange percentage of your document Fitting your document to a selected paper sizeChanging the Default Print Settings Setting Your Machine AS a Default MachineAdvanced Options Changing printer settings Printing to a File PRNMacintosh Printing Printing a documentLinux Printing Printing from applicationsPrinting files Configuring Printer Properties Open the Unified Driver ConfiguratorPrinter Properties window opens Changing the Settings for Each Copy CopyingBasic Copy Changing the Default Copy Settings Using Special Copy FeaturesID card copying Up or 4-up copying N-upSetting Copy Timeout Deciding the Form of Copy OutputClone copying Erasing background imagesScanning Basic Scanning MethodScanning Originals and Sending to Your Computer Scan to PC For USB connected machineUsing Samsung Scan Manager Set Scan Button tabScan Destination Scan PropertyScanning with TWAIN-ENABLED Software Scanning Using the WIA DriverMacintosh Scanning Setting scan information in Scan Manager Linux ScanningScanning with USB Scanning with networkAdding Job Type Settings Using the Image ManagerTo save a new Job Type setting To save a Job Type setting for the next scan jobTools Name Function Using a FAX in Your Computer FaxingPreparing to FAX Sending a faxSetting the fax header Sending a FAX in Your MachineSet Fax Receiving tab Change Port tabDelaying a fax transmission Sending a fax manuallyConfirming a transmission Automatic redialingAdding documents to a reserved delay fax job Canceling a reserved delay fax jobReceiving a FAX in Your Machine Sending a priority faxReceiving manually in Tel mode Receiving automatically in Answering Machine/Fax modeReceiving faxes manually using an extension telephone Receiving faxes using Drpd modeAdjusting the Document Settings Forwarding a FAX to Another DestinationSetting UP Address Book Forwarding a received fax to another destinationSpeed dial numbers Group dial numbersPrinting Sent FAX Report Automatically Searching Address Book for an entryMachine status and advanced feature FAX SetupChanging the fax setup options SendingCopy Setup Change DefaultChanging the copy setup options Auto ReportPrinting a Report Clearing MemoryNetwork Menu OverviewItems Option DHCPv6 Config Network TCP/IP IPv4Static IPv6 ActivateUsing Syncthru WEB Service Management toolsIntroducing Useful Management Tools Using the Smart Panel Program Changing the Smart Panel Program SettingsOpening the Troubleshooting Guide SmarthruUsing Setip Program Using SmarThruUsing the Linux Unified Driver Configurator Opening the Unified Driver ConfiguratorPrinters configuration Printers Configuration Scanners PortsScanners configuration Switches to Printers configurationSwitches to Scanners configuration Printers tabPorts configuration Switches to Ports configurationSharing Ports Between Printers and Scanners Maintenance Cleaning the scan unit Storing the Toner CartridgeScanner lid Scanner glass Document feeder glass White bar Tips for Moving & Storing Your Machine Handling instructionsUse of non-Samsung and refilled toner cartridge Estimated cartridge lifeTroubleshooting TroubleshootingRedistributing Toner Clearing Original Document JamsTips for Avoiding Paper Curls Tips for Avoiding Paper JamsScanner lid Clearing Paper Jams Inside the machineExit area Message Meaning Suggested Solutions Understanding Display MessagesChecking display messages When End Life Replace New cart Install TonerNetwork Problem End of lifeSelf Diagnostics Prepare newCartridge Remove seal tapeSolving Other Problems Power problemsPaper feeding problems Condition Suggested SolutionsPrinting problems Condition Possible Suggested Cause SolutionsPrinting quality problems Condition Copying problems Condition Suggested SolutionScanning problems Fax problems Samsung Scan Manager ProblemCommon Windows problems Common Linux problems Common Macintosh problems Not scanSupplies and accessories HOW to PurchaseAvailable Maintenance Parts Available SuppliesChecking REPLACEABLE’S Lifespan Specifications Hardware SpecificationsEnvironmental Specifications SpecificationsElectrical Specifications Power ratingaPower consumption Print Media Specifications Type Size DimensionsTRAY1 Manual Tray Contact samsung worldwide Contact Samsung worldwideCOUNTRY/REG Customer Care WEB Site ION Center South Africa Glossary Dot Matrix Printer DuplexDuty Cycle EmulationITU-T No chart IntranetIP address MAC addressResolution NetWareOriginals PostScriptSubnet Mask Toner CartridgeUNC Path WatermarkIndex Network setup 80 N-up copy 61 N-up printing Poster, print 54 power offPower saver Print resolution setWatermark Windows
Related manuals
Manual 60 pages 24.41 Kb

SCX-4600, SCX-4623 specifications

The Samsung SCX-4623 and SCX-4600 are multifunction laser printers designed for small to medium-sized businesses and home offices. They combine printing, scanning, copying, and faxing capabilities in one compact device, making them ideal for users looking for efficiency and versatility.

One of the standout features of the SCX-4623 is its printing speed, which reaches up to 24 pages per minute for black and white documents. This swift performance is complemented by a first page-out time of about 8.5 seconds, ensuring that users can quickly print their essential documents without long waits. High-quality output is achieved thanks to a print resolution of up to 1200 x 1200 dpi, delivering sharp and clear text and images.

The SCX-4600 shares many of these features but also includes specific enhancements aimed at improving user experience. This model is equipped with a user-friendly control panel that simplifies navigation through various functions, from printing to scanning. Both devices utilize Samsung’s innovative AnyWeb Print technology, allowing users to easily collect and utilize content from multiple web pages without the hassle of switching between different windows.

In terms of scanning capabilities, both models come with a flatbed scanner that supports a range of resolutions up to 1200 x 1200 dpi. This enables users to scan documents and images with precision. Additionally, the SCX-4623 offers an automatic document feeder (ADF), which can streamline the scanning and copying of multi-page documents, making workflows more efficient.

These printers also feature Samsung's Easy Eco Driver, which helps reduce toner usage and energy consumption, making them environmentally friendly without sacrificing quality. The SCX-4623 and SCX-4600 support various connectivity options, including USB and network printing, ensuring seamless integration into any office environment.

With a compact design, these models are tailored for spaces where desk real estate is limited. Both printers come with a range of security features, including password protection for documents, ensuring sensitive information remains secure.

In summary, the Samsung SCX-4623 and SCX-4600 are robust multifunction printers that provide excellent printing, scanning, copying, and faxing capabilities. Their speed, quality, and user-friendly features make them valuable assets for any office setting, combining technology and functionality in one reliable package.
Top Page Image Contents