Samsung Comprehensive Guide to SCX 4600 Toner Usage and Printer Features
Page 50

•Do not run a sheet of labels through the machine more than once. The adhesive backing is designed for only a single pass through the machine.

•Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged.

Card stock/Custom-sized paper

Postcards, cards and other custom-sized materials can be printed with this machine.

•Do not print on media smaller than 76 mm (3.00 inches) wide or 127 mm (5.00 inches) long.

•In the software application, set margins at least 6.4 mm (0.25 inches) away from the edges of the material.

•If media weight is over 160 g/m2 (43 lb), try printing in the rear cover (face up).

Letterhead/ Preprinted paper

 

SINGLE-SIDED

DOUBLE-SIDED

Tray1

Face down

Face up

Manual tray

Face up

Face down

•Letterhead/ Preprinted paper must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the machine’s fusing temperature for 0.1 second. Check your machine’s specification to view the fusing temperature about 170°C(338 °F).

•Letterhead/ Preprinted paper ink must be non-flammable and should not adversely affect machine rollers.

•Forms and letterhead should be sealed in a moisture-proof wrapping to prevent changes during storage.

•Before you load letterhead/preprinted paper, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper, reducing print quality.

Photo

•Make sure not to use the inkjet photo paper with this machine. It could cause damage to the machine.

Glossy

Load one paper to the manual tray at a time, glossy side facing up.

•Recommended media: Glossy paper (Letter) for this machine by HP

Brochure Paper (Product: Q6611A) only.

•Recommended media: Glossy paper (A4) for this machine by HP

Superior Paper 160 glossy (Product: Q6616A).

SETTING THE PAPER SIZE AND TYPE

After loading paper in the paper tray, set the paper size and type using the control panel. These settings will apply to copy and fax modes. For computer printing, select the paper size and type in the application program you use on your computer (See "Opening printing preferences" on

page 53).

The settings made from the machine driver override the settings on the control panel.

Setting the paper size

1.Press Menu on the control panel.

2.Press the left/right arrow until System Setup appears and press OK.

3.Press the left/right arrow until Paper Setup appears and press OK.

4.Press the left/right arrow until Paper Size appears and press OK.

5.Press the left/right arrow to select the paper tray you want and press OK.

6.Press the left/right arrow to select the paper size you want.

7.Press OK to save the selection.

8.Press Stop/Clear to return to ready mode.

If you want to use special-sized paper-such as a billing paper, select Edit... in the Paper tab in the Printing Preferences (See "Opening printing preferences" on page 53).

Setting the paper type

1.Press Menu on the control panel.

2.Press the left/right arrow until System Setup appears and press OK.

3.Press the left/right arrow until Paper Setup appears and press OK.

4.Press the left/right arrow until Paper Type appears and press OK.

5.Press the left/right arrow to select the paper tray you want and press OK.

6.Press the left/right arrow to select the paper type you want.

7.Press OK to save the selection.

8.Press Stop/Clear to return to ready mode.

Setting the paper source

1.Press Menu on the control panel.

2.Press the left/right arrow until System Setup appears and press OK.

3.Press the left/right arrow until Paper Setup appears and press OK.

4.Press the left/right arrow until Paper Source appears and press OK.

5.Press the left/right arrow until Copy Tray or Fax Tray appears and press OK.

6.Press the left/right arrow to select the paper tray you want.

7.Press OK to save the selection.

Media and tray_ 50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Multi Functional Printer Copyright CopyrightContent ContentSetting the default tray and paper Entering characters using the number keypadUsing the save modes Setting job timeout Preparing originals Loading originalsDeciding the form of copy output Setting copy timeout Using help Using special print featuresBasic copy Changing the settings for each copy Using Samsung Scan ManagerSetting up address book Preparing to fax Using a fax in your computerAdjusting the document settings Printing sent fax report automatically Fax setupUsing the Linux Unified Driver Configurator Using the Smart Panel programUsing SetIP program Solving other problemsHow to purchase Hardware specificationsSafety information Safety informationImportant Safety Symbols Operating EnvironmentOperating Method Installation / Moving Maintenance / CheckingSupply Usage Regulatory information Laser Safety StatementOzone Safety Perchlorate WarningCorrect Disposal of Batteries in this Product Power SaveRecycling FCC Information to the User Taiwan only Radio Frequency EmissionsRussia only Canadian Radio Interference RegulationsYou should also know that Germany only FAX BrandingRinger Equivalence Number Important warning Replacing the Fitted Plug for UK onlyDeclaration of Conformity European Countries Approvals and CertificationsEC Certification Openssl LicenseOriginal Ssleay License China only About this user’s guide About this user’s guideConvention Convention Description ExampleSamsung website Finding More InformationMaterial Name Description DownloadableFeatures of your new product Features of your new productSpecial Features Print Duplex 2-sided printing manual Copy Features by ModelsFeatures Front view IntroductionMachine Overview IntroductionRear view Control Panel Overview SCX-4623 Series Control Panel Overview SCX-4600 Series Scan toTurning on the Machine Understanding the Status LEDIntroducing the Useful Buttons Supplied Software Setting UP the HardwareGetting started Getting startedWindows ContentsSystem Requirements MacintoshRequirements Installing USB Connected MACHINE’S DriverLinux Open the Applications folder Utilities Print Setup Utility Installing the Unified Linux DriverInstalling the SmartPanel Select Uninstall and click UninstallSetting up a client computer Installing the Printer Setting UtilitySetting up a host computer Sharing Your Machine LocallySelect Share this printer Network Environment Network setupUsing a Wired Network Introducing Useful Network ProgramsIP setting using SetIP Program Windows Setting IP addressIP setting using control panel IP setting using SetIP Program MacintoshRestoring factory default settings Installing Wired Network or USB Connected MACHINE’S DriverNetwork parameter setting IP setting using SetIP Program LinuxHelp Search againDirect Input Set IP AddressInstall Linux Driver and add network Printer IPV6 ConfigurationSetting IPv6 addresses Activating IPv6Manual address configuration Connecting SyncThru Web ServiceDHCPv6 address configuration Stateful Setting the Date and Time Basic setupAltitude Adjustment Changing the Clock ModeEntering Characters Using the Number Keypad Changing the Default ModeSetting Sounds Using the Save Modes Setting the Default Tray and PaperSetting JOB Timeout Loading Originals Media and trayPreparing Originals On the scanner glassChanging the Tray Size Media sizes supported in each modeSelecting Print Media Document feederManual tray Loading Paper in the TrayTray Types Tray Manual Tray Tips on using the manual trayPrinting on Special Media Labels EnvelopeTransparency Pressure leverSetting the Paper Size and Type Getting the small sized printout Using the Output SupportStacking papers firmly Basic Printing Printer Driver FeaturesPrinting Printer driverCanceling a print job Using HelpUsing Special Print Features Using a favorite settingPrinting booklets Manual Printing multiple pages on one sheet of paperPrinting posters Printing on both sides of paper ManualChange percentage of your document Using watermarksUsing overlay Fitting your document to a selected paper sizeAdvanced Options Changing the Default Print SettingsSetting Your Machine AS a Default Machine Macintosh Printing Changing printer settingsPrinting to a File PRN Printing a documentPrinting files Linux PrintingPrinting from applications Printer Properties window opens Configuring Printer PropertiesOpen the Unified Driver Configurator Basic Copy Changing the Settings for Each CopyCopying ID card copying Changing the Default Copy SettingsUsing Special Copy Features Up or 4-up copying N-upClone copying Setting Copy TimeoutDeciding the Form of Copy Output Erasing background imagesScanning Originals and Sending to Your Computer Scan to PC ScanningBasic Scanning Method For USB connected machineScan Destination Using Samsung Scan ManagerSet Scan Button tab Scan PropertyMacintosh Scanning Scanning with TWAIN-ENABLED SoftwareScanning Using the WIA Driver Scanning with USB Setting scan information in Scan ManagerLinux Scanning Scanning with networkTo save a new Job Type setting Adding Job Type SettingsUsing the Image Manager To save a Job Type setting for the next scan jobTools Name Function Preparing to FAX Using a FAX in Your ComputerFaxing Sending a faxSet Fax Receiving tab Setting the fax headerSending a FAX in Your Machine Change Port tabConfirming a transmission Delaying a fax transmissionSending a fax manually Automatic redialingReceiving a FAX in Your Machine Adding documents to a reserved delay fax jobCanceling a reserved delay fax job Sending a priority faxReceiving faxes manually using an extension telephone Receiving manually in Tel modeReceiving automatically in Answering Machine/Fax mode Receiving faxes using Drpd modeAdjusting the Document Settings Forwarding a FAX to Another DestinationSpeed dial numbers Setting UP Address BookForwarding a received fax to another destination Group dial numbersPrinting Sent FAX Report Automatically Searching Address Book for an entryChanging the fax setup options Machine status and advanced featureFAX Setup SendingChanging the copy setup options Copy SetupChange Default Auto ReportPrinting a Report Clearing MemoryItems Option NetworkMenu Overview Static DHCPv6 ConfigNetwork TCP/IP IPv4 IPv6 ActivateIntroducing Useful Management Tools Using Syncthru WEB ServiceManagement tools Opening the Troubleshooting Guide Using the Smart Panel ProgramChanging the Smart Panel Program Settings SmarthruUsing Setip Program Using SmarThruPrinters configuration Using the Linux Unified Driver ConfiguratorOpening the Unified Driver Configurator Printers Configuration Scanners PortsSwitches to Scanners configuration Scanners configurationSwitches to Printers configuration Printers tabSharing Ports Between Printers and Scanners Ports configurationSwitches to Ports configuration Maintenance Scanner lid Scanner glass Document feeder glass White bar Cleaning the scan unitStoring the Toner Cartridge Use of non-Samsung and refilled toner cartridge Tips for Moving & Storing Your MachineHandling instructions Estimated cartridge lifeRedistributing Toner TroubleshootingTroubleshooting Clearing Original Document JamsScanner lid Tips for Avoiding Paper CurlsTips for Avoiding Paper Jams Clearing Paper Jams Inside the machineExit area Checking display messages Message Meaning Suggested SolutionsUnderstanding Display Messages Network Problem When End Life Replace New cartInstall Toner End of lifeCartridge Self DiagnosticsPrepare new Remove seal tapePaper feeding problems Solving Other ProblemsPower problems Condition Suggested SolutionsPrinting problems Condition Possible Suggested Cause SolutionsPrinting quality problems Condition Copying problems Condition Suggested SolutionScanning problems Common Windows problems Fax problemsSamsung Scan Manager Problem Common Linux problems Common Macintosh problems Not scanAvailable Maintenance Parts Supplies and accessoriesHOW to Purchase Available SuppliesChecking REPLACEABLE’S Lifespan Environmental Specifications SpecificationsHardware Specifications SpecificationsPower consumption Electrical SpecificationsPower ratinga TRAY1 Manual Tray Print Media SpecificationsType Size Dimensions COUNTRY/REG Customer Care WEB Site ION Center Contact samsung worldwideContact Samsung worldwide South Africa Glossary Duty Cycle Dot Matrix PrinterDuplex EmulationIP address ITU-T No chartIntranet MAC addressOriginals ResolutionNetWare PostScriptUNC Path Subnet MaskToner Cartridge WatermarkIndex Power saver Network setup 80 N-up copy 61 N-up printingPoster, print 54 power off Print resolution setWatermark Windows
Related manuals
Manual 60 pages 24.41 Kb

SCX-4600, SCX-4623 specifications

The Samsung SCX-4623 and SCX-4600 are multifunction laser printers designed for small to medium-sized businesses and home offices. They combine printing, scanning, copying, and faxing capabilities in one compact device, making them ideal for users looking for efficiency and versatility.

One of the standout features of the SCX-4623 is its printing speed, which reaches up to 24 pages per minute for black and white documents. This swift performance is complemented by a first page-out time of about 8.5 seconds, ensuring that users can quickly print their essential documents without long waits. High-quality output is achieved thanks to a print resolution of up to 1200 x 1200 dpi, delivering sharp and clear text and images.

The SCX-4600 shares many of these features but also includes specific enhancements aimed at improving user experience. This model is equipped with a user-friendly control panel that simplifies navigation through various functions, from printing to scanning. Both devices utilize Samsung’s innovative AnyWeb Print technology, allowing users to easily collect and utilize content from multiple web pages without the hassle of switching between different windows.

In terms of scanning capabilities, both models come with a flatbed scanner that supports a range of resolutions up to 1200 x 1200 dpi. This enables users to scan documents and images with precision. Additionally, the SCX-4623 offers an automatic document feeder (ADF), which can streamline the scanning and copying of multi-page documents, making workflows more efficient.

These printers also feature Samsung's Easy Eco Driver, which helps reduce toner usage and energy consumption, making them environmentally friendly without sacrificing quality. The SCX-4623 and SCX-4600 support various connectivity options, including USB and network printing, ensuring seamless integration into any office environment.

With a compact design, these models are tailored for spaces where desk real estate is limited. Both printers come with a range of security features, including password protection for documents, ensuring sensitive information remains secure.

In summary, the Samsung SCX-4623 and SCX-4600 are robust multifunction printers that provide excellent printing, scanning, copying, and faxing capabilities. Their speed, quality, and user-friendly features make them valuable assets for any office setting, combining technology and functionality in one reliable package.
Top Page Image Contents