JVC TDR6 Issuing Commands, Front Panel Navigation, Displays, Type of Revision

Page 6

Issuing Commands

Tasks and examples are presented in a series of step-by-step instructions. Commands or information that you enter into the system appear in a different type, as shown in the following example:

To restore the factory default1 configuration, select config>default>restore>default1 from the front panel, or issue the remote command mc default restore default1.

If the command contains variable information that is to be typed into the system, the variable information is found within karats < >. In the following example, you would type the command mc default restore then the correct value for <string>: Type mc default restore <string>

Front Panel Navigation

This guide uses right angle brackets (>) to indicate a sequence of menus, submenus, and menu items.

For example, select Control>Clock>Date>June 03, 2003 means:

From the control menu, select clock.

From the clock menu, select date.

At the date option, enter the date, June 03, 2003, in the correct format.

Displays

The system may return values and messages on a front panel LCD, remote terminal, or both. In this guide these values and messages appear in a different type: date = 06/23/2003

Revision History This guide is periodically updated and revised. For documentation updates, call Tiernan Customer Service.

Revision

Date

Type of Revision

 

 

 

A

01/2002

Initial release. Corresponds to code version 2.53.

 

 

 

B

01/2003

Updated manual to include information and front panel

 

 

and remote commands that support implementation of

 

 

VBI 4:2:2 expanded windows and BISS features.

Updated and added front panel and remote commands relating to auto select functionality (service, audio, and user data), video chroma, audio data and sample rates, BER, and signal levels. Removed the video Secam command. This manual corresponds to code version 3.20.

Customer Service We hope this guide provides all the information and instructions you need to operate the TDR6. However, if you need assistance, contact Tiernan Customer Service at our corporate headquarters, located in the United States, through any of the following methods:

Phone 858.657.5454, Monday – Friday,

7:30 a.m. – 6:00 p.m. pacific standard time Fax 858.657.5455

Email support@tiernan.com

After-hours Emergency Customer Service Paging: 858.657.5454, option 5 Leave a detailed voice message and your call will be returned.

iv

01-0870-401B 01/03

Preface

Image 6
Contents TDR6 Electric Shock Hazard Contents Appendix F Option Module Overview Chapter Configuring the TDR6Chapter Troubleshooting Appendix G Demodulator Application NotesLocating Information Using This GuidePreface Important InformationDisplays Issuing CommandsFront Panel Navigation RevisionErrors Cartons and Packing MaterialsLCD Display OVE SAAIMQ MitiUse Approved Attachments Only Viii 01-0870-401B 01/03 Overview Overview Overview 01-0870-401B 01/03 Installing the TDR6 AC Power CordsVentilation Connecting to a Power Source Power-up SequenceBasic TDR6 SD Configuration with No Option Modules Installed Connecting to a Remote Unit TMAC-6125 PortsConnecting to a Network Cabling the Analog Audio Connectors TDEC-6161 PortsLNB Power Cabling the TDEM-611001-0870-401B 01/03 Front Panel TDR6 Front PanelTDR6 DTV Receiver/Decoder Menu Structure LCD Display LCD Symbols LCD Text FormatsData a Menu Qpsk Key Character Displayed Correcting Mistakes Example Command Description Parameters / Response Values DVBQPSK, 8PSK, 16QAM DetailsInputConfigFilter allows you set the PCR filter Message No services available BERPID NTSC, PAL, AutoMPEG-2 Value, that does not begin with Important Considerations when entering Biss Ekey EIDControlEIA-232 used to configure the remote port MACSaving a User Configuration Restoring a Default ConfigurationRestoring a User Configuration Locking the Front PanelPerforming a System Reset Setting the DateSetting the Time Unlocking the Front PanelUsing a Remote Unit Configuring Remote Software ParametersRemote Port Command Types Ethernet PortBaud 01-0870-401B 01/03 TDR6 HD/SD Back Panel with Remote Designators Error Messages Explanation Action Required Informational Remote Commands ResponseChannelmode DelayAuto LangVOL Sample RateSource MPEG-2, Atsc MPEG2 BissDC Autosel Biss ModeBiss Status DC FilterEbno DclockDmlock LNBRolloff 35RCRO, 25RCRO FaultlogclearHdvd Delay TuneMC Access Unlock MC Access CodeMC Access FP RO, RW MC Config ListPgca Mode MC Default RestorePgca Authorization MC Ethernet IP AddressHandshake Pgca TimeoutData InterfaceVBI Control VD DelayVBI VBI FormatVD PID VD Mode PAL, NTSC, AutoVD Setup VD SubmodeConfiguring the TDR6 ConfigurationQuick Start Selecting a Service TDR6 Detailed Configuration Procedure Detailed TDR6 ConfigurationSetting Local Date and Time Demodulator ConfigurationConfiguring the L-Band Carrier Frequency Parameter Front Panel Menu Remote Command Qpsk01-0870-401B 01/03 Current Faults TroubleshootingFault Reporting and Monitoring Fault HistoryCommand Mnemonics Abbreviation Option Module Fault Descriptors are defined in the following table Viewing Current Faults Viewing the Fault History LogInput Status LED Not Illuminated Minimum E b /N 0 dBPerformance Problems Technical Specifications FACTORY-CONFIGURABLE FeaturesStandard Features Standard-Definition Video Decoder Default ConfigurationsDemodulator a D High-Definition Video DecoderRemote Control Audio Decoder a FUser Data a B Front Panel Access Ethernet01-0870-401B 01/03 Fault Relay Port Pin Specifications Port PinoutsEthernet Port Pin Assignments Signal Signal Definition User Data port Pin Specifications Standard RS232Number Synchronous Asynchronous Port Specifications TMAC-6125 SpecificationsTDEC-6100 Specifications TDEC-6161 SpecificationsTAUD-6100 Specifications TDEM-6110 Specifications LNB Port Specifications01-0870-401B 01/03 Tiernan VBI Data Transmission PALTiernan VBI Data Transmission Tiernan CC Mode is for Ntsc Format Only Tiernan Proprietary Closed Captions Tiernan CCDVB 422 Expanded Windows, 16-line and 32-line Lines Expanded Windows Field for an Encoded Picture Frame Front Panel Commands for Encoder Configuration Tiernan Closed Captions Front Panel CommandsVE Vbipass Remote Commands for Encoder ConfigurationVE TCC 32LINES01-0870-401B 01/03 Option Module Overview Typical Option ModuleOption Module Overview Demodulator Application Notes Industry Standard LNB FrequenciesDemodulator Tuner SAW Filter Information Rate SpacingMinimum and Maximum Information Rates Output Spectrum WidthEb/N0 Definition TransponderEb/N0 Estimation Algorithm Estimating Eb/N0 Using a Spectrum AnalyzerDemodulator Low Eb/N0 Alarm Spectrum AnalyzerDiagnostic Commands Offset = Actual RF Programmed RF Table Top and Rack Mount Installation Instructions Rear Rack Mount Instructions Rear Rack Bracket Mounting Instructions Fuse01-0870-401B 01/03 Index Index