JVC TDR6 Default Configurations, Demodulator a D, Standard-Definition Video Decoder

Page 71

Default Configurations

B

This appendix provides the settings for the TDR6 default factory configurations.

All parameter settings are the same for all factory defaults, except where noted.

The TDR6 is set to the DVB-compliant defaults at the factory.

		Defaults

	Parameter	Settings for DVB, Default1, Default2, and Default3	Exceptions
	Parameter	Configurations	Exceptions
		Configurations

	Input	ASI	Default3 = RF_A

	Demodulator A - D

	RF Frequency	11210 MHz

	LO Frequency	10000 MHz

	Data Rate	8448000 bps

	Code Rate	5/6

	LNB Power	Off

	Modulation	QPSK

	Rolloff	25RCRO

	Tuner Freq	1210

	Sym Rate	5500187

	Standard-Definition Video Decoder

	Video PID	Defaults to the first video channel detected in the selected
		service.

	Auto Select	On

	Video Mode	PAL
		If the selected service is NTSC, the auto-detect function of the
		video decoder senses the mode and automatically switches to
		the NTSC mode.

	PAL Submode	I (in PAL mode only)

	Setup 7.5 IRE	Auto (in NTSC mode only)

	Video Delay	0

	Vertical Offset	0

	Horizontal Offset	0

	Tiernan Closed	Off
	Captions

	High-Definition Video Decoder

	Video PID	Defaults to the first video channel detected in the selected
		service.

	Video Format	720p

	Video Frame Rate	59.94

Default Configurations

01-0870-401B 01/03

61

Image 71

Contents TDR6 Electric Shock Hazard Contents Appendix G Demodulator Application Notes Chapter Configuring the TDR6Chapter Troubleshooting Appendix F Option Module OverviewImportant Information Using This GuidePreface Locating InformationRevision Issuing CommandsFront Panel Navigation DisplaysLCD Display ErrorsCartons and Packing Materials Miti SAAIMQ OVEUse Approved Attachments Only Viii 01-0870-401B 01/03 Overview Overview Overview 01-0870-401B 01/03 Ventilation Installing the TDR6AC Power Cords Power-up Sequence Connecting to a Power SourceBasic TDR6 SD Configuration with No Option Modules Installed TMAC-6125 Ports Connecting to a Remote UnitConnecting to a Network TDEC-6161 Ports Cabling the Analog Audio ConnectorsCabling the TDEM-6110 LNB Power01-0870-401B 01/03 TDR6 Front Panel Front PanelTDR6 DTV Receiver/Decoder Menu Structure LCD Text Formats LCD Display LCD SymbolsData a Menu Qpsk Key Character Displayed Correcting Mistakes Example QPSK, 8PSK, 16QAM Command Description Parameters / Response ValuesDVB DetailsInputConfigFilter allows you set the PCR filter BER Message No services availableNTSC, PAL, Auto PIDMPEG-2 Value, that does not begin with EID Important Considerations when entering Biss EkeyMAC ControlEIA-232 used to configure the remote portLocking the Front Panel Restoring a Default ConfigurationRestoring a User Configuration Saving a User ConfigurationUnlocking the Front Panel Setting the DateSetting the Time Performing a System ResetRemote Port Using a Remote UnitConfiguring Remote Software Parameters Ethernet Port Command TypesBaud 01-0870-401B 01/03 TDR6 HD/SD Back Panel with Remote Designators Informational Remote Commands Response Error Messages Explanation Action RequiredLang DelayAuto ChannelmodeBiss Sample RateSource MPEG-2, Atsc MPEG2 VOLDC Filter Biss ModeBiss Status DC AutoselLNB DclockDmlock EbnoTune FaultlogclearHdvd Delay Rolloff 35RCRO, 25RCROMC Config List MC Access CodeMC Access FP RO, RW MC Access UnlockMC Ethernet IP Address MC Default RestorePgca Authorization Pgca ModeInterface Pgca TimeoutData HandshakeVBI Format VD DelayVBI VBI ControlVD Submode VD Mode PAL, NTSC, AutoVD Setup VD PIDQuick Start Configuring the TDR6Configuration Selecting a Service Demodulator Configuration Detailed TDR6 ConfigurationSetting Local Date and Time TDR6 Detailed Configuration ProcedureConfiguring the L-Band Carrier Frequency Qpsk Parameter Front Panel Menu Remote Command01-0870-401B 01/03 Fault History TroubleshootingFault Reporting and Monitoring Current FaultsCommand Mnemonics Abbreviation Option Module Fault Descriptors are defined in the following table Viewing the Fault History Log Viewing Current FaultsMinimum E b /N 0 dB Input Status LED Not IlluminatedPerformance Problems FACTORY-CONFIGURABLE Features Technical SpecificationsStandard Features High-Definition Video Decoder Default ConfigurationsDemodulator a D Standard-Definition Video DecoderUser Data a B Remote ControlAudio Decoder a F Ethernet Front Panel Access01-0870-401B 01/03 Port Pinouts Fault Relay Port Pin SpecificationsNumber Synchronous Asynchronous Ethernet Port Pin Assignments Signal Signal DefinitionUser Data port Pin Specifications Standard RS232 TMAC-6125 Specifications Port SpecificationsTAUD-6100 Specifications TDEC-6100 SpecificationsTDEC-6161 Specifications LNB Port Specifications TDEM-6110 Specifications01-0870-401B 01/03 PAL Tiernan VBI Data TransmissionTiernan VBI Data Transmission Tiernan Proprietary Closed Captions Tiernan CC Tiernan CC Mode is for Ntsc Format OnlyDVB 422 Expanded Windows, 16-line and 32-line Lines Expanded Windows Field for an Encoded Picture Frame Tiernan Closed Captions Front Panel Commands Front Panel Commands for Encoder Configuration32LINES Remote Commands for Encoder ConfigurationVE TCC VE Vbipass01-0870-401B 01/03 Typical Option Module Option Module OverviewOption Module Overview Demodulator Tuner SAW Filter Demodulator Application NotesIndustry Standard LNB Frequencies Spacing Information RateTransponder Output Spectrum WidthEb/N0 Definition Minimum and Maximum Information RatesSpectrum Analyzer Estimating Eb/N0 Using a Spectrum AnalyzerDemodulator Low Eb/N0 Alarm Eb/N0 Estimation AlgorithmDiagnostic Commands Offset = Actual RF Programmed RF Table Top and Rack Mount Installation Instructions Rear Rack Mount Instructions Fuse Rear Rack Bracket Mounting Instructions01-0870-401B 01/03 Index Index