JVC TDR6 installation and operation guide Technical Specifications, FACTORY-CONFIGURABLE Features

Page 69

Technical Specifications

A

The specifications for your TDR6 depend upon the specific option modules installed.

FACTORY-CONFIGURABLE FEATURES

INPUT INTERFACE MODULES

TDEM-6110 Module – Four switchable Input QPSK/8PSK/16QAM Receiver

 

Four selectable L-band inputs

 

DVB® -compliant FEC decoding, deinterleaving, and descrambling

 

LNB power supplied through the L-band feed cable, 13V, 18V,or OFf selectable,

 

350mA maximum current

HDTV DECODING

TDEC-6161 Module

HD VIDEO PROCESSING

MPEG-2 4:2:0 Main Profile @ High Level (up to 70 Mbps)

 

ATSC resolutions

 

1920 x 1080i (25, 30, and 29.97 fps)

 

1280 x 720p (60 and 59.94 fps)

HD VIDEO OUTPUT

TDEC-6161 Module

 

Two serial digital outputs per SMPTE 292M SDI @ 1.485 Gbps, two BNC connectors

HD AUDIO OUTPUT

TAUD-6100 Module

 

Four AES/EBU digital stereo pairs (eight mono channels) via four BNC connectors

 

MPEG decoding and Dolby AC3 decoding of 2- or 5.1-channels through an external

 

decoder

SDTV DECODING

TDEC-6100 Module

SD VIDEO PROCESSING

MPEG-2 4:2:0 Main Profile @ Main Level (1 to 15 Mbps)

 

MPEG-2 4:2:2 Studio Profile @ Main Level (2.5 to 50 Mbps)

 

Horizontal resolutions: 720, 704, 544, 480, and 352

 

Vertical resolutions: 480/240 (NTSC) and 576/288 (PAL)

SD VIDEO OUTPUT

TDEC-6100 Module

 

Composite analog NTSC (525) or PAL (625), BNC connector

 

Serial digital component video (SMPTE 259M), BNC connector

SD VBI DATA

TDEC-6100 Module

 

Proprietary passage of NTSC line 21 closed captions

 

DVB 4:2:2 expanded windows carriers WSS, VPS, VITC, CC, AMOL, XDS, etc.

SD AUDIO OUTPUT

TDEC-6100 Module

 

Two AES3 digital stereo pairs, XLR

 

Two AES3 digital stereo pairs @ 48 kSps, embedded in SDI, per SMPTE 272A

 

Two analog stereo pairs, terminal block connector

 

TAUD-6100 Module

 

Four AES3 digital stereo pairs, BNC

 

Dolby AC3 pass-through of 2- or 5.1-channels for an external Dolby decoder,

 

64 to 640 kbps @ 48 kSps

 

MPEG Layer II, sampling rates of 32, 44.1, and 48 kSps, output rates from

 

64 to 384 kbps

Technical Specifications

01-0870-401B 01/03

59

Image 69
Contents TDR6 Electric Shock Hazard Contents Chapter Troubleshooting Chapter Configuring the TDR6Appendix F Option Module Overview Appendix G Demodulator Application NotesPreface Using This GuideLocating Information Important InformationFront Panel Navigation Issuing CommandsDisplays RevisionErrors Cartons and Packing MaterialsLCD Display IMQ SAAOVE MitiUse Approved Attachments Only Viii 01-0870-401B 01/03 Overview Overview Overview 01-0870-401B 01/03 Installing the TDR6 AC Power CordsVentilation Power-up Sequence Connecting to a Power SourceBasic TDR6 SD Configuration with No Option Modules Installed TMAC-6125 Ports Connecting to a Remote UnitConnecting to a Network TDEC-6161 Ports Cabling the Analog Audio ConnectorsCabling the TDEM-6110 LNB Power01-0870-401B 01/03 TDR6 Front Panel Front PanelTDR6 DTV Receiver/Decoder Menu Structure LCD Text Formats LCD Display LCD SymbolsData a Menu Qpsk Key Character Displayed Correcting Mistakes Example Command Description Parameters / Response Values DVBQPSK, 8PSK, 16QAM DetailsInputConfigFilter allows you set the PCR filter BER Message No services availableNTSC, PAL, Auto PIDMPEG-2 Value, that does not begin with EID Important Considerations when entering Biss EkeyMAC ControlEIA-232 used to configure the remote portRestoring a User Configuration Restoring a Default ConfigurationSaving a User Configuration Locking the Front PanelSetting the Time Setting the DatePerforming a System Reset Unlocking the Front PanelUsing a Remote Unit Configuring Remote Software ParametersRemote Port Ethernet Port Command TypesBaud 01-0870-401B 01/03 TDR6 HD/SD Back Panel with Remote Designators Informational Remote Commands Response Error Messages Explanation Action RequiredAuto DelayChannelmode LangSource MPEG-2, Atsc MPEG2 Sample RateVOL BissBiss Status Biss ModeDC Autosel DC FilterDmlock DclockEbno LNBHdvd Delay FaultlogclearRolloff 35RCRO, 25RCRO TuneMC Access FP RO, RW MC Access CodeMC Access Unlock MC Config ListPgca Authorization MC Default RestorePgca Mode MC Ethernet IP AddressData Pgca TimeoutHandshake InterfaceVBI VD DelayVBI Control VBI FormatVD Setup VD Mode PAL, NTSC, AutoVD PID VD SubmodeConfiguring the TDR6 ConfigurationQuick Start Selecting a Service Setting Local Date and Time Detailed TDR6 ConfigurationTDR6 Detailed Configuration Procedure Demodulator ConfigurationConfiguring the L-Band Carrier Frequency Qpsk Parameter Front Panel Menu Remote Command01-0870-401B 01/03 Fault Reporting and Monitoring TroubleshootingCurrent Faults Fault HistoryCommand Mnemonics Abbreviation Option Module Fault Descriptors are defined in the following table Viewing the Fault History Log Viewing Current FaultsMinimum E b /N 0 dB Input Status LED Not IlluminatedPerformance Problems FACTORY-CONFIGURABLE Features Technical SpecificationsStandard Features Demodulator a D Default ConfigurationsStandard-Definition Video Decoder High-Definition Video DecoderRemote Control Audio Decoder a FUser Data a B Ethernet Front Panel Access01-0870-401B 01/03 Port Pinouts Fault Relay Port Pin SpecificationsEthernet Port Pin Assignments Signal Signal Definition User Data port Pin Specifications Standard RS232Number Synchronous Asynchronous TMAC-6125 Specifications Port SpecificationsTDEC-6100 Specifications TDEC-6161 SpecificationsTAUD-6100 Specifications LNB Port Specifications TDEM-6110 Specifications01-0870-401B 01/03 PAL Tiernan VBI Data TransmissionTiernan VBI Data Transmission Tiernan Proprietary Closed Captions Tiernan CC Tiernan CC Mode is for Ntsc Format OnlyDVB 422 Expanded Windows, 16-line and 32-line Lines Expanded Windows Field for an Encoded Picture Frame Tiernan Closed Captions Front Panel Commands Front Panel Commands for Encoder ConfigurationVE TCC Remote Commands for Encoder ConfigurationVE Vbipass 32LINES01-0870-401B 01/03 Typical Option Module Option Module OverviewOption Module Overview Demodulator Application Notes Industry Standard LNB FrequenciesDemodulator Tuner SAW Filter Spacing Information RateEb/N0 Definition Output Spectrum WidthMinimum and Maximum Information Rates TransponderDemodulator Low Eb/N0 Alarm Estimating Eb/N0 Using a Spectrum AnalyzerEb/N0 Estimation Algorithm Spectrum AnalyzerDiagnostic Commands Offset = Actual RF Programmed RF Table Top and Rack Mount Installation Instructions Rear Rack Mount Instructions Fuse Rear Rack Bracket Mounting Instructions01-0870-401B 01/03 Index Index