TDR6 Procedures This section provides detailed steps for performing various TDR6 tasks.
Restoring a Default Configuration
To restore a default configuration set:
1.From the DTV Receiver/Decoder menu, select Config. The Config menu displays.
2.Select Default. The Default Configuration menu displays.
3.Scroll through the list of parameters, select the appropriate option, and press Enter. The system will display Initializing . . .
The configuration process may take 3 to 4 minutes. When the system has completed its configuration process, the LCD returns to the DTV Receiver/Decoder main menu.
The operating parameters in use at the time the restore process is executed are overwritten and will be lost if not previously saved as a configuration set.
NOTE
Restoring a User Configuration
1.From the DTV Receiver/Decoder menu, select Config. The Config menu displays.
2.Select User>Restore. The Restore User Configuration menu displays.
3.Scroll through the list of parameters, select the appropriate option, and press Enter. The system will display Initializing . . .
The configuration process may take 3 to 4 minutes. When the system has completed its configuration process, the LCD returns to the DTV Receiver/Decoder main menu.
The operating parameters in use at the time the restore process is executed are overwritten and will be lost if not previously saved as a configuration set.
NOTE
Saving a User Configuration
To save a
1.Configure the TDR6 with the required parameters.
2.Once all parameters are correctly set, select Config from the DTV Receiver/Decoder menu. The Configuration menu displays.
3.Select User>Save. The Save User Configuration menu displays.
4.Scroll through the list of parameters, select the appropriate option, and press Enter.
The configuration process may take 3 to 4 minutes. When the system has completed its configuration process, the asterisk will disappear.
Any configuration parameters previously stored under the selected label will be overwritten once the save process is executed.
NOTE
Locking the Front Panel
To lock the front panel:
1.From the DTV Receiver/Decoder menu, select Control. The Control menu displays.
2.Select FP_Lock. The Front Panel Access menu displays showing the status of the front panel: State = Normal.
3.Press the Up button once. The front panel displays State = Locked.
4.Press Enter. The front panel displays Password = 0 indicating that the front panel is now locked.
Front Panel |
| 29 |