English
Tuner Operations
| 4 Press MEMORY again while the selected | |
Using Preset Tuning | ||
channel number is flashing on the display. | ||
| ||
Once a station is assigned to a channel number, the station | The station is assigned to the selected channel number. | |
• The selected channel number stops flashing and then | ||
can be tuned in quickly. You can preset up to 30 FM and 15 | ||
the frequency flashes for about 5 seconds. | ||
AM stations. | ||
|
7Storing preset stations
Before you start, remember...
There is a time limit in doing the following steps.
If the setting is canceled before you finish, start from step 2 again.
On the front panel
1Tune in to the station you want to store (see “Tuning in to Stations Manually” on page 20).
•If you want to store the FM reception mode for this station, select the FM reception mode you want. See “Selecting the FM Reception Mode” on page 22.
ANALOG DIGITAL AUTO |
| PL DSP SLEEP PROGRAM REPEAT | TA NEWS INFO | INPUT ATT | ||
PPCM AUTO SURROUND |
|
| SPK 1 | 2 RE | C | |
DIGITAL L C | R | GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO | AUTO MUTING | AUTO | MODE | |
|
| A.POSITION | ||||
LPCM SUBWFR LFE | kHz |
MHz | |
VOL |
Ex.: When selecting the FM band
2Press MEMORY.
The channel number position flashes on the display for about 5 seconds.
ANALOG DIGITAL AUTO |
| PL DSP SLEEP PROGRAM REPEAT | TA NEWS INFO | INPUT ATT | ||
PPCM AUTO SURROUND |
|
| SPK 1 | 2 RE | C | |
DIGITAL L C | R | GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO | AUTO MUTING | AUTO | MODE | |
|
| A.POSITION | ||||
LPCM SUBWFR LFE | kHz |
MHz | |
VOL |
3Press CONTROL 3 (or 2) to select a channel number while the channel number position is flashing.
ANALOG DIGITAL AUTO |
| PL DSP SLEEP PROGRAM REPEAT | TA NEWS INFO | INPUT ATT | ||
PPCM AUTO SURROUND |
|
| SPK 1 | 2 RE | C | |
DIGITAL L C | R | GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO | AUTO MUTING | AUTO | MODE | |
|
| A.POSITION | ||||
LPCM SUBWFR LFE | kHz |
MHz | |
VOL |
5Press CONTROL 3 (or 2) to select another frequency you want to store while the frequency is flashing on the display.
6Repeat steps 2 to 5 until you store all the stations you want.
To erase a stored preset station
Storing a new station on a used channel number erases the previously stored one.
From the remote control
After tuning in to the station you want to store,
1Press MEMORY.
The channel number position flashes on the display for about 5 seconds.
2Press the number buttons to select a preset channel number while the channel number position is flashing.
•For channel number 5, press 5.
•For channel number 15, press +10 then 5.
•For channel number 30, press +10, +10, then 10.
3Press MEMORY again.
4Press TUNING 9 or ( to select another frequency you want to store.
5Repeat steps 1 to 4 until you store all the stations you want.
21