JVC RX-DV31 manual Release DBS, Try to operate your DBS tuner by pressing DBS

To change the transmittable signals for operating other manufacturers’ DBS tuner

1Press and hold DBS .

2Press DBS.

3Enter the manufacturer’s code using the number buttons (1 – 9, 0).

See the table on the right to find the code.

4Release DBS .

You can always perform the following operation:

DBS Turns on or off the DBS tuner.

After pressing DBS, you can perform the following operations on the DBS tuner:

CHANNEL +/– Changes the channels.

1 – 9, 0, 100+ Selects the channels.

For channel number 5, press 5.

For channel number 10, press 1, then 0. For channel number 23, press 2, then 3. For channel number 135, press 100+, 3, then 5.

•TV RETURN will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.

Note:

•Refer also to the manual supplied for your DBS tuner.

5Try to operate your DBS tuner by pressing DBS .

When your DBS tuner turns on or off, you have entered the correct code.

If there is more than one code listed for your brand of DBS tuner, try each one until the correct one is entered.

Manufactures’ codes for DBS tuner

Manufacturer	Codes
Echostar	40
Gemini	02
General Instrument	01*, 41
Hamlin	03 – 06
Hitachi	42
Hughes	43
Jerrold	07 – 15
Macom	16 – 18
Magnavox	19
Oak	20 – 22
Panasonic	23, 24, 44
Philips	25 – 30
Pioneer	31, 32
Primestar	45
RCA	46
Samsung	36
Scientific Atlanta	33 – 35
Sony	47
Tocom	37
Toshiba	48
Zenith	38, 39

*“01” is the initial code.

Note:

•Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

English

68