1If you have already plugged your VCR, TV, and this unit into the AC outlets, unplug their AC power cords first.
2Connect your VCR, TV, and this unit following
“CONNECTIONS 1” on the previous page, using cables with monaural
3Connect the audio input/output jacks on VCR, TV, and this unit using the audio cords.
•See pages 9 and 10.
4Connect the video input/output jacks on VCR, TV and this unit following “CONNECTIONS 2” on the previous page, using the composite video cord, with
5Plug the AC power cords of the components into the AC outlets.
6When turning on the TV for the first time after the AV COMPU LINK connection, turn the TV volume to the minimum using the TV volume control on the TV.
7Turn on other connected components first, then turn on this unit.
•When turning on the VCR, use the remote control supplied with this 
.
The AV COMPU LINK remote control system allows you to use the five basic functions listed below.
One-touch DVD play
Simply by starting playback on the
The TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.
Automatic selection of TV’s input mode
•When you select TV as the source to play on the unit, the TV automatically changes the input mode to the TV tuner so that you can watch TV.
•When you select DVD, VCR, or DBS as the source to play on the unit, the TV automatically changes the input mode to the appropriate position so that you can view the playback picture.
Notes:
•When connecting a TV with the AV COMPU LINK EX terminal to this unit, you cannot use a component video cable (as CASE 3 on the previous page).
•When you select TV as the source on the unit, you cannot see the menu on the TV screen since the AV COMPU LINK remote control system automatically changes the TV’s input mode to the TV tuner. If you do not mind stopping listening to the TV sounds, you can then show the
English
Remote control of the TV and VCR using this remote control
For details, see page 66.
•Aim the remote control directly at the remote sensor on each target component.
One-touch video play
Simply by inserting a video cassette without its safety tab into the VCR, you can enjoy the video playback without setting other switches manually. The unit automatically turns on and changes the source to VCR.
The TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.
When you insert a video cassette with its safety tab, press the play (3) button on the VCR or on the remote control. You can get the same result.
Automatic power on/off
The TV and VCR turn on and off along with the unit.
When you turn on the unit;
•If the previously selected source is VCR, the TV and VCR will turn on automatically.
•If the previously selected source is TV or DVD, only the TV will turn on automatically.
When you turn off the unit, the TV and VCR will turn off.
Note:
•If you turn off the unit while recording on the VCR, the VCR will not turn off, but continue recording.
64