JVC RX-DV31 manual Precautions Checking the Supplied Accessories, Adjusting the Voltage Selector

English

Before Installation

Precautions Checking the Supplied Accessories

General Precautions

•DO NOT insert any metal object into the unit.

•DO NOT disassemble the unit or remove screws, covers, or cabinet.

•DO NOT expose the unit to rain or moisture.

Locations

•Install the unit in a location that is level and protected from moisture.

•The temperature around the unit must be between 5˚C and 35˚C.

•Make sure there is good ventilation around the unit. Poor ventilation could cause overheating and damage the unit.

Handling the unit

•DO NOT touch the power cord with wet hands.

•DO NOT pull on the power cord to unplug it. When unplugging the cord, always grasp the plug so as not to damage the cord.

•Keep the power cord away from the connecting cords and the antenna. The power cord may cause noise or screen interference. It is recommended to use a coaxial cable for antenna connection, since it is well-shielded against interference.

•When a power failure occurs, or when you unplug the power cord, the preset settings such as preset FM or AM channels and sound adjustments may be erased in a few days.

Check to be sure you have all of the following supplied accessories.

The number in the parentheses indicates the quantity of the pieces supplied.

•Remote control (1)

•Batteries (2)

•AM loop antenna (1)

•FM antenna (1)

•Composite video cord (1)

•AC plug adaptor (1)

If anything is missing, contact your dealer immediately.

Adjusting the Voltage Selector

Before connections, always do the following first if necessary.

Select the correct voltage in VOLTAGE SELECTOR on the rear by using a screw driver.

Check to be sure if the voltage mark is set to the voltage for the area where you use this unit.

		VOLTAGE	220V	110V	SELECTOR
	110V	SELECTOR			VOLTAGE
220V			230-240V	127V
	127V
230-240V

Voltage mark

•Times given for various operations are for reference only. Actual time will vary somewhat.

•The following mark is used in this manual to indicate available disc types for the operations explained in each section. Unavailable disc types are shown in halftone color.

1