JVC RX-DV31 manual Press VFP, Press cursor 3 or 2 repeatedly to select the VFP mode

DVD Player Operations

English

Changing the VFP Setting

The VFP (Video Fine Processor) function enables you to adjust the picture based on the picture tone, or personal preference.

Before using the remote control, press DVD so that the remote control works for the DVD player.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

& During playback

1Press VFP.

The current VFP setting screen appears on the TV.

NORMAL

GAMMA +0

BRIGHTNESS +0

CONTRAST +0

SATURATION +0

TINT+0

SHARPNESS +3

Y DELAY +0

Ex.: When “NORMAL” is selected

2Press cursor 3 (or 2) repeatedly to select the VFP mode.

•Each time you press the button, the VFP mode changes as follows.

NORMAL “ CINEMA “ USER1 “ USER2 “

(back to the beginning)

NORMAL	Normally select this.
CINEMA	Suitable for a movie source.
USER1/USER2	You can adjust parameters that
	affect the appearance of picture
	and store the settings (see the right
	column).

To turn off the VFP setting screen

Press VFP.

To adjust the appearance of the picture

You can adjust the appearance of picture and store in “USER1” and “USER2.”

1Press VFP, then press cursor 3 (or 2) repeatedly to select “USER1” or “USER2.”

USER1

GAMMA +0

BRIGHTNESS +0

CONTRAST +0

SATURATION +0

TINT+0

SHARPNESS +3

Y DELAY +0

2Press cursor ∞ (or 5) repeatedly to select a parameter you want to adjust.

Adjust the parameters so that the picture you are viewing appears as you prefer.

GAMMA	Adjust if the neutral color is bright or
	dark. The brightness of dark and bright
	portions is maintained.
	Available range: –4 (darkest) to +4
	(brightest)
BRIGHTNESS	Adjust if the picture is bright or dark on
	the whole.
	Available range: –16 (darkest) to +16
	(brightest)
CONTRAST	Adjust if the far and near position is
	unnatural.
	Available range: –16 to +16
SATURATION	Adjust if the picture is whitish or
	blackish.
	Available range: –16 (most blackish) to
	+16 (whitest)
TINT	Adjust if the human skin color is
	unnatural.
	Available range: –16 to +16
SHARPNESS	Adjust if the picture is indistinct.
	Available range: +0 to +3
Y DELAY	Adjust if the picture looks separately/
	overlapped.
	Available range: –2 to +2

3Press ENTER.

VFP parameters list disappears, and the following pop-up window for the selected item appears on the TV.

GAMMA +0

GAMMA +0

Ex.: When “GAMMA” is selected

45