JVC RX-DV31 AV Compu Link Remote Control System, Connections 1 AV Compu Link Connection, Case

English

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV and VCR) through the unit.

This unit is equipped with the AV COMPU LINK-III, which has added a function to operate JVC’s video components through the video components terminals. To use this remote control system, you need to connect the video components you want to operate, following the diagrams below and the procedures on page 64.

• Refer also to the manuals supplied with your video components.

CONNECTIONS 1: AV COMPU LINK Connection

		VOLTAGE
220V	110V	SELECTOR
	127V
230-240V
				CAUTION:
				SPEAKER
		CAUTION:		IMPEDANCE
		SPEAKER		8	16
		IMPEDANCE
		1 OR 2:
		8	16
		1 AND 2:
		16	32

CAUTION:

When connecting the TV with the AV COMPU LINK remote control system, connect the unit to the

AV COMPU LINK III or

AV COMPU LINK EX terminal. DO NOT connect the unit to the

AV COMPU LINK RECEIVER/AMP terminal.

VCR TV

Notes:

•When connecting the unit and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic Selection of TV’s Input Mode (see page 64).

•When connecting the VCR only to this unit, connect it directly to the unit using cables with monaural mini-plugs.

CONNECTIONS 2: Video Cable Connection

This unit is equipped with three types of the video terminals—composite video, S-video, and component video, and the signals coming into this unit through one type of video terminals can output only through the terminal of the same type. So you need to connect the VCR and TV to this unit using one of the following two ways—CASE 1 or 2:

•When using the AV COMPU LINK remote control system, set the component video input correctly (see “Video output mode” on page 27); otherwise, the correct input for this unit will not be selected on the TV.

CASE 1	When connecting the source equipment to the unit through the S-video terminals, connect this unit to the
	TV’s Video Input 1 terminal using S-video cables.
		Source		RX-DV31SL		TV
		Equipment	S-video cable		S-video cable
						To Video Input 1
CASE 2	When connecting the source equipment to the unit through the composite video terminals, connect this
	unit to the TV’s Video Input 2 terminal (composite video input) using composite video cables.
		Source		RX-DV31SL		TV
		Equipment	Composite		Composite
			video cable		video cable
						To Video Input 2
CASE 3	When setting the video output mode of the built-in DVD player to “component,” connect this unit to the
	TV’s Video Input 2 terminals (component video input) using component video cables.
				RX-DV31SL		TV
					Component
					video cable
						To Video Input 2

63