JVC RX-DV31 manual Operating Other Manufacturers’ Equipment, Release VCR

Operating Other Manufacturers’ Equipment

English

To change the transmittable signals for operating other manufacturers’ VCR

1Press and hold VCR .

2Press VCR.

3Enter the manufacturer’s code using the number buttons (1 – 9, 0).

See the table on the right to find the code.

4Release VCR .

You can always perform the following operation:

VCR Turns on or off the VCR.

After pressing VCR, you can perform the following operations on a VCR:

1 – 9, 0	Selects the TV channels on a VCR.
	For channel number 5, press 5.
	For channel number 10, press 1, then 0.
	For channel number 23, press 2, then 3.
	• TV RETURN will function as the ENTER
	button if your equipment requires
	pressing ENTER after selecting a channel
	number.
3	Starts playing.
1	Rewinds a tape.
¡	Fast-winds a tape.
7	Stops playing.
8	Pauses playing. To release, press 3.

Note:

•Refer also to the manual supplied for your VCR.

Manufactures’ codes for VCR

Manufacturer	Codes
JVC	01* – 04
Aiwa	05
Akai	06 – 08
Bell & Howell	09
Daewoo	10
Emerson	11 – 15
Fisher	16 – 19
GE	20, 21
Go Video	22, 24, 25
Goldstar	23
Hitachi	20, 26
Magnavox	27 – 29
Mitsubishi	30 – 33
NEC	34, 35
Panasonic	36, 37
Philips	27
RCA	38
Samsung	39 – 41
Sanyo	16 – 19
Scott	42
Sharp	43, 44
Shintom	45
Sony	46 – 51
Symphonic	52
Teknica	53, 54
Toshiba	55
Zenith	56

* “01” is the initial code.

5 Try to operate your VCR by pressing VCR .
	Note:
When your VCR turns on or off, you have entered the
	• Manufacturers’ codes are subject to change without notice.
correct code.
		If they are changed, this remote control cannot operate the
If there is more than one code listed for your brand of
		equipment.
VCR, try each one until the correct one is entered.

69