JVC RX-DV31 Press Progressive when DVD is selected as the source, When recording onto the VCR

Page 21

Changing the Scanning Mode

Activating the Recording Mode

English

This unit supports the progressive scanning system (480p*) as well as the conventional interlaced scanning system (480i*).

If your TV has component video jacks and supports progressive video input, you can enjoy a high quality picture from the built-in DVD player.

•Refer also to the instruction manuals supplied with your TV.

•You cannot change the scanning mode when “PAL” is selected as the color system of this unit. See page 8.

•You can select the picture source according to the original picture type (film or video source). See “PICTURE SOURCE” on page 55.

•Do not change the scanning mode to “PROGRESSIVE” in the following cases:

–When your TV does not support the progressive video input.

–When you are not connecting your TV to the unit using a component video cord.

From the remote control ONLY

Press PROGRESSIVE when “DVD” is selected as the source.

•Each time you press the button, the scanning mode changes between “INTERLACE” and “PROGRESSIVE.”

INTERLACE Select for conventional TV (initial setting).

PROGRESSIVE Select if your TV with component jacks supports the progressive video input. The PROGRESSIVE indicator lights up.

Notes:

•Some progressive TVs and High-Definition TVs are not fully compatible with this system. When an incompatible picture is played back, change the scanning mode to “INTERLACE.” To check the compatibility of your TV, contact your dealer.

All JVC progressive TVs and High-Definition TVs are fully compatible with this system.

•When you select “PROGRESSIVE” as the scanning mode, the

picture does not come out correctly through composite video and S-video jacks.

*480p and 480i indicate the number of scanning lines and scanning format of an image signal.

–480p indicates 480 scanning lines with progressive format.

–480i indicates 480 scanning lines with interlaced format.

When you play back the multi-channel sources, Recording mode enables you to record the sounds without missing surround elements by down-mixing the center and surround channel signals into the front channel signals.

•When multi-channel software is played back with Recording mode activated, the sounds are down-mixed and come out through the front speakers only.

•For DVD AUDIO ONLY: When down-mixing is prohibited on the disc, this function does not take effect.

On the front panel ONLY

Press and hold REC MODE (SURROUND MODE) until “RECMODE ON” appears on the display.

The REC indicator lights up on the display.

REC indicator

ANALOG DIGITAL AUTO

 

PL DSP SLEEP PROGRAM REPEAT 1A-B RANDOM PROGRESSIVE RDS

TA NEWS INFO

INPUT ATT

PPCM AUTO SURROUND

 

 

SPK 1

2

REC

DIGITAL L C

R

GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO

AUTO MUTING

AUTO

MODE

 

 

A.POSITION

LPCM SUBWFR LFE

kHz

MPEG-2 AAC LS S RS

MHz

VOL

•Each time you press and hold the button, Recording mode is activated (“RECMODE ON”) and deactivated (“RECMODE OFF”) alternately.

RECMODE OFF Normally select this (initial setting). Down-mixing is canceled.

RECMODE ON Select for recording down-mixed sounds.

When recording onto the VCR:

You can record the picture on your video tape without the volume level indication on the TV when Recording mode is activated.

•When you do not want to record the on-screen guide icons, see page 58.

•The choice menu (see page 53) and on-screen bar (see page 36) are always recorded when they appear on the TV.

CAUTION:

Sound coming out of the speakers may be distorted by Recording mode. In this case, decrease the volume until the sound distortion diminishes.

Notes:

•When you turn off the unit or select another source, Recording mode is canceled (“RECMODE OFF”).

•Sound adjustments (see pages 28 and 29) and Surround modes (see pages 32 and 33) do not affect the recording.

•The following buttons do not work while Recording mode is activated (“RECMODE ON”):

–SETTING and ADJUST on the front panel

–SURROUND ON/OFF and SURROUND MODE on the front panel

–Sound adjustment buttons on the remote control

16

Page 20 Page 22
Image 21
Page 20 Page 22
Contents LVT1001-014A Home Cinema DVD-AUDIO/VIDEO Control CenterPrecaución Precaução Producto Laser Classe Precaución Ventilación Adecuada RX-DV31SLAdjusting the Voltage Selector Precautions Checking the Supplied AccessoriesGeneral Precautions LocationsTable of Contents Front Panel Input mode indicators Sound signal indicatorsP. Browsable Still Picture, Bonus KHz for AM station, MHz for FM stationRemote Control English Rear Panel AM antenna connection Connecting the AM and FM AntennasFM antenna connection AntennaConnection diagram How to connect speakers cordsConnecting the subwoofer speaker About connecting cords Connecting Audio/Video Components EnglishSetting the color system For video connectionsTV connection DBS tuner connectionTurn off all the components and the unit before connection Cassette deck/CD recorder connection VCR connectionCassette deck CD recorderPutting Batteries in the Remote Control Digital connectionReplace the cover Adjusting the Volume Turning On the PowerBasic Operations Selecting the Source to Play Basic Operations Listening with headphones Selecting the Front Speakers Changing the Source NameSelecting the Analog or Digital Input Mode Turning Off the Power With the Sleep TimerTurning Off the Sound Temporarily Changing the Display BrightnessChanging the digital input mode manually-for DVD Video only Attenuating the Input SignalSound signal indicators on the display Select when the analog sound is distortedPress Progressive when DVD is selected as the source REC indicator lights up on the displayWhen recording onto the VCR Basic DVD Player Operations Other operation buttons for the DVD player Basic DVD Player Operations About Resume playAbout Tray Lock Setting the AM Tuner Interval Spacing Tuning in to Stations ManuallyTuner Operations Tuner Operations Using Preset TuningPress Memory again while the selected Channel number is flashing on the displayTuning in to a preset station Selecting the FM Reception ModeTo restore the stereo effect MonoSetting Speakers Quickly Basic SettingsPress Setting SpeakersSetting Basic Items Press Memory to finish the settingOperation buttons Operating procedure Basic SettingsRepeat steps 2 and 3 to set other items if necessary Speaker informationLow frequency effect attenuator Dynamic range compressionCrossover frequency Video output mode Digital input Digital in terminalsAuto surround Press Adjust Sound AdjustmentsPress Control 3 or 2 to adjust the front speaker balance Front speaker output balanceTone Sound AdjustmentsSpeaker output levels Subwoofer audio positionDolby surround Dolby Pro Logic Creating Realistic Sound FieldsTypical multi-channel 5.1-channel reproduction Digital multi-channel 5.1 channel surround Dolby DigitalCreating Realistic Sound Fields Available Surround modes for each input signalCreating sound field All Channel StereoPress Surround Mode Activating Surround ModeAbout Surround indicators Selecting Surround ModesFor using test tone Adjust the speaker output levelsPossible × Impossible Mode Dolby Digital DTS Digital Surround Dolby Pro LogicDisc Information DVD Player OperationsPlayable disc types DVD Video DVD Audio VCD SvcdDisc structure DVD Player OperationsPlayback Control function PBC-VCD and Svcd only VCD, SVCD, and CD consist of tracksPress on Screen About the On-screen BarBasic Operation through the On Screen Bar Changing the Time IndicationPress on Screen twice Press EnterPress TOP Menu or Menu Locating a Desired Scene from Disc MenuFrom the DVD menu From the VCD/SVCD menu with PBCSelecting the Subtitle Language Using the on-screen barPress Angle Press Angle repeatedly to select the desired view angleSelecting the Audio Channel Selecting the Audio LanguagePress Audio Press Audio repeatedly to select the desired audio languagePress Audio repeatedly to select the desired audio channel Playing from a Specified Position on DiscLocating a desired title/group Press TITLE/GROUPTo correct a misentry Use the number buttons 0 9 to enter the timePress 8 repeatedly Press 8 oncePress ¡ or Press page repeatedly to select a desired still picturePress Zoom ZoomingPlaying back a bonus group Select a bonus groupPress VFP Press cursor 3 or 2 repeatedly to select the VFP modeRepeat steps 2 to 4 to adjust other parameters Program PlaybackRepeat to program the next steps To stop random playback Repeat PlaybackTrack ALL/GROUP A-B OFF Chapter Title A-B OFFChapter TrackBasic Operations MP3 Disc PlaybackOperations through the MP3 Control Screen Press RepeatOperations Slide-show Playback Jpeg Disc PlaybackStarting slide-show playback Stopping slide-show playback temporarilyRepeat Group Repeat ALL Operations through the Jpeg Control ScreenChoice Menu Operations Configuration of Choice menuChoice EnterPress Choice Press Enter to finish the settingPress cursor 3 or 2 repeatedly to display Picture menu Press cursor ∞ or 5 repeatedly to move to Picture SourceChoice Menu Operations Picture setting menu-PICTURELanguage selection menu-LANGUAGE Video NormalLanguage code list Audio selection menu-AUDIOYou can activate or deactivate the screen saver function Front SPEAKER, Center SPEAKER, Speaker setting menu-SPK. SettingLarge SmallWhen the playback of the disc on the built-in DVD player Other setting menu-OTHERSThis function takes effect only when DVD is selected Time, the unit is turned off automaticallyPop-up window for setting level appears Pop-up window for setting the country code appearsSee Country/Area codes list for Parental Lock on Parental Lock submenu appears on the TVReleasing Parental Lock temporarily New setting is storedCountry/Area codes list for Parental Lock Glossary for DVD Player TV’s Video Input 1 terminal using S-video cables AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection Connections 2 Video Cable ConnectionRemote control of the TV and VCR using this remote control Automatic selection of TV’s input modeAutomatic power on/off One-touch DVD playOperating JVC’s Audio/Video Components Operating Audio ComponentsSound control section Amplifier Operating Video Components FM ModeCD recorder TunerOperating Other Manufacturers’ Equipment Changing the Preset Signal CodesRelease TV Try to operate your TV by pressing TVTry to operate your DBS tuner by pressing DBS Release DBSYou can always perform the following operation Turns on or off the DBS tunerRelease VCR Operating Other Manufacturers’ EquipmentTry to operate your VCR by pressing VCR Manufactures’ codes for VCR Manufacturer CodesGeneral Notes Cleaning Discs MaintenanceCleaning the Unit Handling DiscsTroubleshooting Problem Possible Cause SolutionGeneral For DVD Player For Tuner TroubleshootingFor MP3 For JpegFM tuner IHF SpecificationsAM tuner GeneralPrecaução para a ligação à tensão da rede CA Precaución para la línea de la red CA
Top Page Image Contents