English
Operating Other Manufacturers’ Equipment
The remote control supplied with this unit can transmit control signals for other manufacturers’ TVs, DBS tuners, and VCRs. By changing the transmittable signals from preset ones to the other manufacturers’ signals, you can operate other manufacturers’ components using this remote control.
Changing the Preset Signal Codes
To operate other manufacturers’ components using this remote control:
•Aim the remote control directly at the remote sensor on each equipment.
•To operate a source with the remote control, the source must be selected using source selecting buttons on the remote control.
•Refer also to the manuals supplied with your equipment.
To change the transmittable signals for operating other manufacturers’ TV
1Press and hold TV 
.
2Press TV.
3Enter the manufacturer’s code using the number buttons (1 – 9, 0).
See the table on the right to find the code.
4Release TV 
.
You can always perform the following operations:
TV | Turns on or off the TV. |
TV VOL +/– Adjusts the volume.
TV/VIDEO Sets the input mode (either TV or VIDEO).
After pressing TV, you can perform the following operations on a TV:
CHANNEL +/– Changes the channels.
1 – 9, 0, 100+ Selects the channels.
For channel number 5, press 5.
For channel number 10, press 1, then 0. For channel number 23, press 2, then 3. For channel number 135, press 100+, 3, then 5.
•TV RETURN will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.
Notes:
•Refer also to the manual supplied for your TV.
•Not all of the functions listed on the left may be assigned to specific buttons for some TVs.
•If you cannot change the channels of some TVs by pressing the number buttons, press CHANNEL + or – for changing the channels.
5Try to operate your TV by pressing TV 
.
When your TV turns on or off, you have entered the correct code.
If there is more than one code listed for your brand of
TV, try each one until the correct one is entered.
Manufactures’ codes for TV
Manufacturer | Codes |
JVC | 01* |
Akai | 02 |
Bell & Howell | 03 |
Centurion | 04 |
Coronad | 05 |
Daewoo | 06 – 08 |
Emerson | 09 – 13 |
Fisher | 14 |
GE | 15, 16, 17 |
Goldstar | 18, 19 |
Hitachi | 20, 21 |
KTV | 22, 23 |
Magnavox | 24 |
Marantz | 25 |
Mitsubishi | 25 |
Panasonic | 26, 27 |
Philips | 24 |
Pioneer | 28 |
Proscan | 29 |
Quasar | 30 |
RadioShack | 31 |
RCA | 02, 17, 32 – 35 |
Samsung | 36, 37 |
Sanyo | 14 |
Sears | 38 |
Sharp | 39 |
Sony | 40 |
Symphonic | 41, 42 |
Toshiba | 38 |
Zenith | 43, 44 |
*“01” is the initial code.
Note:
•Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
67