JVC RX-DV31 manual Operating Video Components, CD recorder, Tuner, Memory, FM Mode

7CD recorder

After pressing CDR, you can perform the following operations on a CD player and a CD recorder:

3	Starts playing.
4	Returns to the beginning of the current (or
	previous) track.
¢	Skips to the beginning of the next track.
¡	Searches forwards for a particular point.
1	Searches backwards for a particular point.
7	Stops playing.
8	Pauses playing. To release it, press 3.
1 – 10, +10	Selects a track number directly.
	For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10. For track number 30, press +10, +10, then 10.

Note:

•When you start recording on the CD recorder, use the buttons on the CD recorder itself or on the remote control supplied with it.

7Tuner

You can always perform the following operations:

FM/AM	Tunes into the last selected FM or AM
	station.

•Each time you press the button, the band alternates between FM and AM.

After pressing FM/AM, you can perform the following operations on a tuner:

1 – 10, +10	Selects a preset channel number directly.
	For channel number 5, press 5.
	For channel number 15, press +10,
	then 5.
	For channel number 20, press +10,
	then 10.
TUNING 9 or ( Tunes in to stations.
MEMORY	Memorizes preset channels.
FM MODE	Changes the FM reception mode.

Operating Video Components

To operate JVC’s video components using this remote control

•You need to connect JVC’s video components through the AV COMPU LINK- jacks (see page 63) in addition to the audio/video connections (see pages 9 to 11).

•Some JVC’s VCRs can accept two types of the control signals—remote codes “A” and “B.” Before using this remote control, make sure that the remote control code of the connected VCR is set to code “A.”

•To operate the video component(s) using the remote control, aim the remote control directly at the remote sensor on each component, not on this unit.

7TV

You can always perform the following operations:

TV Turns on or off the TV.

TV VOL +/– Adjusts the volume.

TV/VIDEO Sets the input mode (either TV or VIDEO).

After pressing TV, you can perform the following operations on a TV:

CHANNEL +/– Changes the channels.

1 – 9, 0, 100+ Selects the channels.

For channel number 5, press 5.

For channel number 10, press 1, then 0. For channel number 23, press 2, then 3. For channel number 135, press 100+, 3, then 5.

TV RETURN Alternates between the previously selected channel and the current channel.

7VCR

You can always perform the following operations:

VCR Turns on or off the VCR.

After pressing VCR, you can perform the following operations on a VCR:

CHANNEL +/– Changes the channels.

1 – 9, 0	Selects the TV channels on a VCR.
	For channel number 5, press 5.
	For channel number 10, press 1, then 0.
	For channel number 23, press 2, then 3.
3	Starts playing.
1	Rewinds a tape.
¡	Fast-winds a tape.
7	Stops playing.
8	Pauses playing. To release it, press 3.

English

66