JVC RX-DV31 manual Troubleshooting, For Tuner, For MP3, For Jpeg

Page 78

English

Troubleshooting

7 For Tuner

PROBLEM

POSSIBLE CAUSE

SOLUTION

Hard to listen to broadcast because

The AM loop antenna is too close to

Change the position and direction of the AM

of noise.

the unit.

loop antenna.

 

 

 

 

The supplied FM antenna is not

Extend the FM antenna at the best position.

 

properly extended and positioned.

 

 

 

 

Continuous hiss or buzzing during

Incoming signal is too weak.

Connect an outdoor FM antenna or contact

FM reception.

 

your dealer.

 

 

 

 

The station is too far away.

Select a new station.

 

 

 

 

An incorrect antenna is used.

Check with your dealer to be sure you have

 

 

the correct antenna.

 

 

 

 

Antennas are not connected

Check connections.

 

properly.

 

 

 

 

Occasional cracking noise during

Ignition noise from automobiles.

Move the antenna farther from automobile

FM reception.

 

traffic.

 

 

 

7 For MP3

PROBLEM

POSSIBLE CAUSE

SOLUTION

A disc cannot be played.

No MP3 files are recorded on the

Replace the disc.

 

disc.

 

 

 

 

 

The disc is unplayable (such as

 

 

CD-ROM).

 

 

 

 

 

MP3 files do not have the correct

Add the file extension—.mp3, .Mp3, .mP3, or

 

file extension—.mp3, .Mp3, .mP3,

.MP3—to their file names (see page 49).

 

or .MP3 in their file names.

 

 

 

 

 

MP3 files are made at bit rate under

This unit cannot play back such files. Replace

 

64 kbps.

the disc.

 

 

 

 

MP3 files are not recorded in a

Replace the disc. (Record MP3 files using a

 

format compliant with ISO 9660

compliant application.)

 

Level 1 or 2.

 

 

 

 

No MP3 files, only JPEG files are

The MP3/JPEG setting is set to

When both MP3 files and JPEG files are

played.

“JPEG.”

recorded on a disc, to play MP3 files, set the

 

 

MP3/JPEG setting to “MP3” (see page 56).

 

 

 

7 For JPEG

PROBLEM

POSSIBLE CAUSE

SOLUTION

A disc cannot be played.

No JPEG files are recorded on the

Replace the disc.

 

disc.

 

 

 

 

 

The disc is unplayable (such as

 

 

CD-ROM).

 

 

 

 

 

JPEG files do not have the correct

Add the file extension—.jpg, .jpeg, .JPG,

 

file extension in their file names.

.JPEG or any uppercase and lowercase

 

 

combination (such as “.Jpg”)—to their file

 

 

names (see page 51).

 

 

 

 

JPEG files are not made with

This unit cannot play back such files. Replace

 

baseline JPEG format.

the disc.

 

 

 

 

JPEG files are not recorded in a

Replace the disc. (Record JPEG files using a

 

format compliant with ISO 9660

compliant application.)

 

Level 1 or 2.

 

 

 

 

No JPEG files, only MP3 files are

The MP3/JPEG setting is set to

When both MP3 files and JPEG files are

played.

“MP3.”

recorded on a disc, to play JPEG files, set the

 

 

MP3/JPEG setting to “JPEG” (see page 56).

 

 

 

73

Image 78
Contents Home Cinema DVD-AUDIO/VIDEO Control Center LVT1001-014APrecaución Precaução Producto Laser Classe RX-DV31SL Precaución Ventilación AdecuadaGeneral Precautions Precautions Checking the Supplied AccessoriesAdjusting the Voltage Selector LocationsTable of Contents P. Browsable Still Picture, Bonus Input mode indicators Sound signal indicatorsFront Panel KHz for AM station, MHz for FM stationRemote Control English Rear Panel FM antenna connection Connecting the AM and FM AntennasAM antenna connection AntennaConnection diagram How to connect speakers cordsConnecting the subwoofer speaker Setting the color system Connecting Audio/Video Components EnglishAbout connecting cords For video connectionsTV connection DBS tuner connectionTurn off all the components and the unit before connection Cassette deck VCR connectionCassette deck/CD recorder connection CD recorderPutting Batteries in the Remote Control Digital connectionReplace the cover Basic Operations Turning On the PowerAdjusting the Volume Selecting the Source to PlaySelecting the Front Speakers Listening with headphonesBasic Operations Changing the Source NameTurning Off the Sound Temporarily Turning Off the Power With the Sleep TimerSelecting the Analog or Digital Input Mode Changing the Display BrightnessSound signal indicators on the display Attenuating the Input SignalChanging the digital input mode manually-for DVD Video only Select when the analog sound is distortedPress Progressive when DVD is selected as the source REC indicator lights up on the displayWhen recording onto the VCR Basic DVD Player Operations Other operation buttons for the DVD player Basic DVD Player Operations About Resume playAbout Tray Lock Setting the AM Tuner Interval Spacing Tuning in to Stations ManuallyTuner Operations Press Memory again while the selected Using Preset TuningTuner Operations Channel number is flashing on the displayTo restore the stereo effect Selecting the FM Reception ModeTuning in to a preset station MonoPress Setting Basic SettingsSetting Speakers Quickly SpeakersSetting Basic Items Press Memory to finish the settingOperation buttons Repeat steps 2 and 3 to set other items if necessary Basic SettingsOperating procedure Speaker informationLow frequency effect attenuator Dynamic range compressionCrossover frequency Video output mode Digital input Digital in terminalsAuto surround Press Control 3 or 2 to adjust the front speaker balance Sound AdjustmentsPress Adjust Front speaker output balanceSpeaker output levels Sound AdjustmentsTone Subwoofer audio positionTypical multi-channel 5.1-channel reproduction Creating Realistic Sound FieldsDolby surround Dolby Pro Logic Digital multi-channel 5.1 channel surround Dolby DigitalCreating sound field Available Surround modes for each input signalCreating Realistic Sound Fields All Channel StereoAbout Surround indicators Activating Surround ModePress Surround Mode Selecting Surround ModesPossible × Impossible Mode Adjust the speaker output levelsFor using test tone Dolby Digital DTS Digital Surround Dolby Pro LogicPlayable disc types DVD Player OperationsDisc Information DVD Video DVD Audio VCD SvcdPlayback Control function PBC-VCD and Svcd only DVD Player OperationsDisc structure VCD, SVCD, and CD consist of tracksAbout the On-screen Bar Press on ScreenPress on Screen twice Changing the Time IndicationBasic Operation through the On Screen Bar Press EnterFrom the DVD menu Locating a Desired Scene from Disc MenuPress TOP Menu or Menu From the VCD/SVCD menu with PBCPress Angle Using the on-screen barSelecting the Subtitle Language Press Angle repeatedly to select the desired view anglePress Audio Selecting the Audio LanguageSelecting the Audio Channel Press Audio repeatedly to select the desired audio languageLocating a desired title/group Playing from a Specified Position on DiscPress Audio repeatedly to select the desired audio channel Press TITLE/GROUPUse the number buttons 0 9 to enter the time To correct a misentryPress ¡ or Press 8 oncePress 8 repeatedly Press page repeatedly to select a desired still picturePlaying back a bonus group ZoomingPress Zoom Select a bonus groupPress cursor 3 or 2 repeatedly to select the VFP mode Press VFPRepeat steps 2 to 4 to adjust other parameters Program PlaybackRepeat to program the next steps Repeat Playback To stop random playbackChapter Chapter Title A-B OFFTrack ALL/GROUP A-B OFF TrackMP3 Disc Playback Basic OperationsOperations through the MP3 Control Screen Press RepeatOperations Starting slide-show playback Jpeg Disc PlaybackSlide-show Playback Stopping slide-show playback temporarilyOperations through the Jpeg Control Screen Repeat Group Repeat ALLChoice Configuration of Choice menuChoice Menu Operations EnterPress cursor 3 or 2 repeatedly to display Picture menu Press Enter to finish the settingPress Choice Press cursor ∞ or 5 repeatedly to move to Picture SourceLanguage selection menu-LANGUAGE Picture setting menu-PICTUREChoice Menu Operations Video NormalLanguage code list Audio selection menu-AUDIOYou can activate or deactivate the screen saver function Large Speaker setting menu-SPK. SettingFront SPEAKER, Center SPEAKER, SmallThis function takes effect only when DVD is selected Other setting menu-OTHERSWhen the playback of the disc on the built-in DVD player Time, the unit is turned off automaticallySee Country/Area codes list for Parental Lock on Pop-up window for setting the country code appearsPop-up window for setting level appears Parental Lock submenu appears on the TVNew setting is stored Releasing Parental Lock temporarilyCountry/Area codes list for Parental Lock Glossary for DVD Player Connections 1 AV Compu Link Connection AV Compu Link Remote Control SystemTV’s Video Input 1 terminal using S-video cables Connections 2 Video Cable ConnectionAutomatic power on/off Automatic selection of TV’s input modeRemote control of the TV and VCR using this remote control One-touch DVD playOperating JVC’s Audio/Video Components Operating Audio ComponentsSound control section Amplifier CD recorder FM ModeOperating Video Components TunerRelease TV Changing the Preset Signal CodesOperating Other Manufacturers’ Equipment Try to operate your TV by pressing TVYou can always perform the following operation Release DBSTry to operate your DBS tuner by pressing DBS Turns on or off the DBS tunerTry to operate your VCR by pressing VCR Operating Other Manufacturers’ EquipmentRelease VCR Manufactures’ codes for VCR Manufacturer CodesCleaning the Unit MaintenanceGeneral Notes Cleaning Discs Handling DiscsTroubleshooting Problem Possible Cause SolutionGeneral For DVD Player For MP3 TroubleshootingFor Tuner For JpegAM tuner SpecificationsFM tuner IHF GeneralPrecaución para la línea de la red CA Precaução para a ligação à tensão da rede CA