JVC VR 601 Alarm Recording, Externally triggered Recording, PRE- Alarm OFF Main Alarm REC Enable

Page 28

4.2.3 Alarm Recording

Take the following steps to activate the programmed alarm recording. For ALM OPERATION, REC RATE, REC QUALITY, AUDIO, ALM TYPE, ALM DURATION, and PRE-ALARMsettings, please refer to section 5.2 for more details.

(1)Press the Setup button to enter the MAIN MENU.

(2)Select ALARM and press the Enter button to enter the ALARM SETTING.

(3)Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If audio is required, set AUDIO to ON. If pre-alarm recording is required, set PRE-ALARM to ON.

(4)To activate the alarm recording, set ALM OPERATION to ON. To deactivate it, set ALM OPERATION to OFF.

MAIN MENU

RECORD

ALARM CLOCK / TIMER COMMUNICATION DISK

SYSTEM

GOTO ALARM PAGE

ALARM SETTING

ALM OPERATION

 

: OFF

REC RATE

 

: 20F/S

REC QUALITY

: BEST

AUDIO

: OFF

ALM TYPE

: NO

ALM DURATION

: 0 SEC

PRE- ALARM

: OFF

MAIN PAGE

 

ALARM REC ENABLE

 

4.2.4 Externally triggered Recording

By connecting the RECORD IN of ALARM I/O on the rear panel of the DVR, you can activate/deactivate the recording function of a DVR. The file will be kept with a prefixed “R”. Please refer to section 2.3 for more details.

*About the location of the buttons, please refer to Page 10 2.1 Front View.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Digital Video Recorder Important Safeguards Safety Precautions for USA and Canada AvertissementPower System For Your Safety AustraliaImportant In the United Kingdom Mains Supply AC 230 Connection to the mains supplyPlace of storage and use About the provided power cables for VR-601 UHandling the unit Important Safety Instructions AC adapter sectionTable Of Contents Specifications Compatible Multiplexers Product Features Product IntroductionFront View Hard-disk drive compartmentHard-disk compartment lock Operate buttonRec Indicator Disk IndicatorOperate Indicator Up / Down buttonsMobile Rack Power LED Mobile Rack HDD LEDRear View This Figure is Looked from the Rear Alarm In/OutNo Connection Connectiong to the AC Adapter Basic ConnectionMemo Connecting with a Single Camera Connecting with a MultiplexerConnecting with a Quad MultiplexerAttaching AN External Device to DVR Clock SETHard-Disk Drive Installation MaxtorQuality Best Ntsc Rate 6 HR System InformationMUX OFF Size POS Updating System Software Configuring Recording Settings BestHigh StandardNtsc MUX OFF PAL MUX OFF Recording Operations Timer RecordingManual Recording Start END 0000-0000 M 0000-0000 W 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000Alarm Recording PRE- Alarm OFF Main Alarm REC EnableExternally triggered Recording REC Quality Best Audio OFF ALM Type ALM DurationDiagrams below Operation Status From REC mode to Playback mode Playback OperationsFast Forward/Reverse Search to play back a particular recorded videoSlow Forward/Reverse You can also operate by using button and buttonPlay Back Picture-by-picture Search Full List Alarm List Time Search Thumbnail SD Card Search OperationsPlay Back Recorded Video from a HDD of the mobile rack Full List SearchAlarm list Search Alarm ListTime Search SearchSearch Thumbnail Year Full List Thumbnail Search2003 SD Card Search Backup Operations Mobile Rack HD BackupBackup Backup Main SET HD2 Usage Alarm Select Main Backup ALL to HD2Alarm Select Main Backup Alarm to HD2 Disk Setting Reformat HD2 UsageSearch button 1220 2001-02-01 0330 2001-03-02 0420 1330Security Digital Card SD Card Backup Backup the System setting info into SD CardSave the whole setting into the SD card Archive Single image Clips into SD CardTransfer the system setting info of DVR to another Key Lock OperationMenu Setup REC Setting REC QualityAlarm Setting REC Quality PRE- Alarm Clock / Timer Clock / Timer SET REC Enable OFF Main Timer REC EnableTimer REC ScheduleNET Enable NET Enable OFF NET Dhcp NET IP SET FTP Setting MainCommunication Comm Setting FTP Setting Comm ID EnableREC Mode Alarm REC REC ModePassword FTP Account FTP IPUser PathDisk Setting Backup Full Main Disk REFORMAT/CLEARBackup HD HD2 Usage BackupSystem Situation MAC 00 0c 0c 00 00 Bios SW 1.00J Date Jun 9 General Command Format SetupCommunication Protocol Value of a specific front panel key Request Time Second Category=0x02 Set Time Second Category=0x02Request State Second Category=0x06 Description of System StateMobile Rack Installation Jumper settings of hard-disk drives for the system LocationPage Push the active-handle inward Lock the Key System Default Disk Setting Reformat SET RS232 / RS485D Message Meanings Network Viewer PIN noPage View the VR-601 video from a remote PC Viewing images View all the connected devices Function Buttons DescriptionView single device Playback function bar Change the Record & Timer Properties Via the Network Set the regular record settingsSet the Alarm record settings Set the record timerArchive Images to the Computer Image Viewer 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03 Point stops recording Previously recorded data remainingPhysical specification of RJ-45 cable for Ethernet Cable ConnectionsConnect to a computer Connect to a LAN Hub IntranetRJ-45 PIN configuration for LAN Hub Configure Your DVR Network SettingsEnable DVR Network Function Connect to WAN InternetEnable Dhcp Function Set IP Address12.3 TCP/IP Communication Software Page 12.5 TCP/IP Configuration setting 12.4 TCP/IP installationClick Start Settings Control Panel Network Connection Testing Click Start Programs MS-DOS PromptPage Design and specifications subject to change without notice Model Number VR-601 U VR-601 EManufacturer Model Channel ColorsDecode on DVR Viewer
Top Page Image Contents