4.5.2 Security Digital Card (SD Card) Backup
The SD card slot of the rear unit has three functions as shown below:
1.Archive Single image Clips into SD Card
Please take the following steps to archive a critical image in a SD card.
(1)Insert a SD Card into the SD card slot of the rear unit.
(2)Start playing back the recorded video. (When playing back recorded video made by a multiplexer, you must get into the multiplexing mode and display picture by picture in order to select the desired image for archiving. Press the Monitor button 
to get into the multiplexing mode under this mode so that the light of the Monitor button 
is off and the pictures are switching swiftly)
(3)Press the PAUSE button 
to freeze the desired pictures.
(4)Press the Enter button 
to save the image in the SD Card.
The quantity of pictures that can be stored depends on the SD card capacity. It depends on SD card capacity how many pictures can be stored. You can have the saved images printed out in any computer. The image is stored in the JPEG compressed format. If more than one clip is stored in a SD card, file names will be assigned in sequence as shown below.
SAVE TO J0000.JPG SAVE TO J0001.JPG
…
SAVE TO J000N.JPG
2.Backup the System setting info into SD Card.
The
Save the whole setting into the SD card:
Insert a SD card into the SD card slot.
Press the Setup button 
to enter the setup mode and select the SYSTEM.
Highlight SYSTEM and press the Enter button 
to enter the SYSTEM SETTING page. Set SD SETUP to SAVE. Then the system setting info will auto save into SD card.
*About the location of the buttons, please refer to Page 10 2.1 Front View.
38