JVC VR 601 Clock / Timer SET REC Enable OFF Main Timer REC Enable, REC Schedule

5.3 CLOCK / TIMER

The DVR provides a weekly table, consisting of two periods of time each day for scheduled recording. This option allows you to set the time each day that the DVR will start and stop recording.

MAIN MENU

RECORD

ALARM

CLOCK / TIMER

COMMUNICATION

DISK

SYSTEM

GOTO TIMER PAGE

CLOCK:

This entry allows users to set the system time.

CLOCK / TIMER
CLOCK	: SET
REC ENABLE	: OFF
TIMER	: SET
MAIN PAGE
TIMER REC ENABLE

NOTE: Clock data is retained for about 3 months after the 15-hour power supply is used up (Operate On mode).

REC ENABLE:

This option enables/disables the programmed scheduled recording.

ON: Enables the scheduled recording.

OFF: Disables the scheduled recording.

TIMER:

This entry allows users to program the time each day that the DVR will start and stop recording. There are two time periods each day available for scheduling. The time is displayed in a 24-hour clock format. If there is a time overlapping showing between two continual time period settings, the device will automatically combine the two time-period settings into one combined time-period setting.

REC SCHEDULE

START END	START END
S :06:00-16:00	12:00-18:00

REC SCHEDULE

START END	START END
S :06:00-18:00	00:00-00:00

45