AUDIO:
This option determines the way to record sound if necessary.
ON: Enables AUDIO recording.
OFF: Disables AUDIO recording.
NOTE: Audio function can only be activated in the following refresh rate in NTSC(PAL): 12(10), 5.5(5.5), 2.4(2.9), 1.22(1.52), 0.71(0.88) fields/sec
MULTIPLEXER:
For optimum image recording please set this option to ON when the DVR is connected to a multiplexer for use. Set this option to OFF when it is only connected to a single camera or Quad processor.
5.2 ALARM SETTING
This menu allows users to program the configuration of alarm recording only when an alarm input is activated. The device will record as long as the alarm input is activated.
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO ALARM PAGE
ALM OPERATION:
ALARM SETTING
ALM OPERATION |
| : OFF |
REC RATE |
| : 20F/S |
REC QUALITY | : BEST | |
AUDIO | : OFF | |
ALM TYPE | : NO | |
ALM DURATION | : 0 SEC | |
PRE- ALARM | : OFF | |
MAIN PAGE |
| |
ALARM REC ENABLE |
| |
This option determines whether to activate/deactivate the alarm recording when it detects an alarm input. ON: The device activates the alarm recording when it detects an alarm input.
OFF: The device ignores the alarm signal when it detects an alarm input.
REC RATE:
This option is for the purpose of adjusting the number of pictures recorded every second into a storage disk when an alarm input is activated. For a NTSC unit, there are 5 different record speeds you can select from: 60F/S (60 fields per second), 30F/S, 20F/S, 12F/S, and REMAIN. For a PAL unit, there are 5 different record speeds you can select from: 50F/S (50 fields per second), 25F/S, 17F/S, 10F/S, and REMAIN. If you select REMAIN for use, the device will record images at the same speed as set on the REC page.
*About the location of the buttons, please refer to Page 10 2.1 Front View.
42