JVC VR 601 instruction manual System

Page 50
05/15/03 18:19:32 ON
05/15/03 18:19:32 OFF 05/15/03 18:19:32 REC 05/15/03 18:19:32 STOP 05/15/03 18:19:32 PLAY 05/15/03 18:19:32 V-IN 05/15/03 18:19:32 V-LOSS 05/15/03 18:19:32 P-LOSS

5.6 SYSTEM

This page is used for accessing the history of the operation status, setting the password, resuming factory default, and determining the menu display background.

MAIN MENU

RECORD

ALARM

CLOCK / TIMER

COMMUNICATION

DISK

SYSTEM

GOTO SYSTEM SETTING

OPERATION LOG:

SYSTEM

 

 

 

: ENTER

OPERATION LOG

MENU BACKGND

 

: 2

BUZZER

: ON

PASSWORD

: SET

SETUP PWD

: OFF

DEFAULT

: LOAD

SD SETUP

: SAVE

VERSION

: ENTER

MAIN PAGE

VIEW OPERATION LOG

This log shows the history of the operation status in chronological order. What the following entries represent is detailed below.

ON: Powers up the device.

OFF: Powers off the device.

REC: Starts recording.

STOP: Ceases recording.

PLAY: Shows recorded video.

V-IN:Video input is connected.

V-LOSS:Video loss occurs.

P-LOSS:Power interruption occurs.

A-IN:Detects an alarm input.

LOCK: Disables the entire front panel controls.

UNLOCK: Releases the key lock.

UPDATE: Updates system software.

Note: The log keeps an operation history on a revolving basis because of a limit is 4000. When the log is full, the newly registered record of an operation will replace the existing records from the oldest one.

50

Image 50
Contents Digital Video Recorder Important Safeguards Safety Precautions for USA and Canada AvertissementImportant In the United Kingdom Mains Supply AC 230 Power SystemFor Your Safety Australia Connection to the mains supplyHandling the unit About the provided power cables for VR-601 UPlace of storage and use Important Safety Instructions AC adapter sectionTable Of Contents Specifications Compatible Multiplexers Product Features Product IntroductionHard-disk compartment lock Front ViewHard-disk drive compartment Operate buttonOperate Indicator Rec IndicatorDisk Indicator Up / Down buttonsMobile Rack Power LED Mobile Rack HDD LEDRear View No Connection Alarm In/OutThis Figure is Looked from the Rear Memo Basic ConnectionConnectiong to the AC Adapter Connecting with a Single Camera Connecting with a MultiplexerConnecting with a Quad MultiplexerAttaching AN External Device to DVR Clock SETHard-Disk Drive Installation MaxtorMUX OFF Size POS System InformationQuality Best Ntsc Rate 6 HR Updating System Software High Configuring Recording SettingsBest StandardNtsc MUX OFF PAL MUX OFF Manual Recording Timer RecordingRecording Operations Start END 0000-0000 M 0000-0000 W 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000Externally triggered Recording Alarm RecordingPRE- Alarm OFF Main Alarm REC Enable REC Quality Best Audio OFF ALM Type ALM DurationDiagrams below Fast Forward/Reverse Operation Status From REC mode to Playback modePlayback Operations Search to play back a particular recorded videoPlay Back Picture-by-picture You can also operate by using button and buttonSlow Forward/Reverse Play Back Recorded Video from a HDD of the mobile rack Search Full List Alarm List Time Search Thumbnail SD CardSearch Operations Full List SearchTime Search Alarm list SearchAlarm List Search2003 Thumbnail SearchSearch Thumbnail Year Full List SD Card Search Backup Backup Main SET HD2 Usage Backup OperationsMobile Rack HD Backup Alarm Select Main Backup ALL to HD2Search button Alarm Select Main Backup Alarm to HD2Disk Setting Reformat HD2 Usage 1220 2001-02-01 0330 2001-03-02 0420 1330Save the whole setting into the SD card Security Digital Card SD Card BackupBackup the System setting info into SD Card Archive Single image Clips into SD CardTransfer the system setting info of DVR to another Key Lock OperationMenu Setup REC Setting REC QualityAlarm Setting REC Quality PRE- Alarm Timer Clock / TimerClock / Timer SET REC Enable OFF Main Timer REC Enable REC ScheduleCommunication NET Enable OFF NET Dhcp NET IP SET FTP Setting MainNET Enable REC Mode Alarm REC Comm Setting FTP Setting Comm IDEnable REC ModeUser PasswordFTP Account FTP IP PathBackup HD HD2 Usage Disk SettingBackup Full Main Disk REFORMAT/CLEAR BackupSystem Situation MAC 00 0c 0c 00 00 Bios SW 1.00J Date Jun 9 Communication Protocol SetupGeneral Command Format Value of a specific front panel key Request State Second Category=0x06 Request Time Second Category=0x02Set Time Second Category=0x02 Description of System StateMobile Rack Installation Jumper settings of hard-disk drives for the system LocationPage Push the active-handle inward Lock the Key System Default Disk Setting Reformat SET RS232 / RS485D Message Meanings Network Viewer PIN noPage View the VR-601 video from a remote PC Viewing images View all the connected devices Function Buttons DescriptionView single device Playback function bar Set the Alarm record settings Change the Record & Timer Properties Via the NetworkSet the regular record settings Set the record timerArchive Images to the Computer Image Viewer 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03 Point stops recording Previously recorded data remainingConnect to a computer Physical specification of RJ-45 cable for EthernetCable Connections Connect to a LAN Hub IntranetEnable DVR Network Function RJ-45 PIN configuration for LAN HubConfigure Your DVR Network Settings Connect to WAN InternetEnable Dhcp Function Set IP Address12.3 TCP/IP Communication Software Page Click Start Settings Control Panel Network 12.4 TCP/IP installation12.5 TCP/IP Configuration setting Connection Testing Click Start Programs MS-DOS PromptPage Design and specifications subject to change without notice Model Number VR-601 U VR-601 EDecode on Manufacturer Model ChannelColors DVR Viewer