JVC VR 601 instruction manual View the VR-601 video from a remote PC

10.1.3 View the VR-601 video from a remote PC

Follow the instructions below to use the Network Viewer to browse a VR-601 video from a remote location. Upon entering the Network Viewer; the connection box will appear as follows.

1.Choose a channel number from the Channel drop-down list.

2.Assign a name for the chosen VR-601.

3.Type in the password and IP of the device and click the Add tag to add the device to the connection list.

4.Click the Connect tag to establish the connection between the devices and the computer. Click OK to begin viewing images.

NOTE: Upon connection, the connection status box indicates the name and IP address of the selected device. If there’s a failure to connect, a “Fail” message appears on the screen right after the device IP address; otherwise an “OK” appears. To add more connections or units to the VR-601, please repeat the above instructions.

Functions	Description
Channel	Assign a display location when you have multiple devices connected.
Name	This box allows you to assign a name to the chosen device.
Password	Type the preset password for making a connection.
URL of the Remote Device Type the IP address which you preset for the device
URL of a Proxy	Type your proxy server address when accessing the Internet via a proxy
Port	server.
	Enter the designated port setting of your proxy server.
Modify	Click to change the settings of a chosen device.
Delete	Click to remove the connection of a chosen device
Connect	Click to establish the connection between the devices and the computer.
OK	Click to access the display page of the Network Viewer
Cancel	Click to exit the program of the Network Viewer.

64