JVC VR 601 instruction manual REC Setting, REC Quality

5.1 REC SETTING

This page allows you to set the recording rate and recording quality, and enables you to continue recording when the disk is full.

MAIN MENU

RECORD

ALARM

CLOCK / TIMER

COMMUNICATION

DISK

SYSTEM

GOTO REC PAGE

REC RATE:

REC SETTING

REC RATE	: 20 F/S
REC QUALITY	: BEST
DISK FULL	: REWRITE
AUDIO	: OFF
MULTIPLEXER	: ON
MAIN PAGE
SET REC RATE

This option is for adjusting the number of pictures recorded every second into a storage disk. The recording rate controls the frequency at which the number of video pictures can be recorded.

●For a NTSC unit, there are 11 different recording rates you can select from: 60F/S (60 fields per second), 30F/S, 20F/S, 12F/S, 5.5F/S, 2.4F/S, 1.22F/S, 0.71F/S, 1 F/4S, 1F/6S, and 1F/8S.

●For a PAL unit, there are 11 different recording rates you can select from: 50F/S (50 fields per second), 25F/S, 17F/S, 10F/S, 5.5F/S, 2.9F/S, 1.52F/S, 0.88F/S, 1 F/4S, 1F/6S, and 1F/8S. Please refer to the table in section 4.1 for details.

NOTE: The 60 f/s (50 f/s for a PAL unit) recording rate can only function in a 352x240 (352x288 for a PAL unit) resolution

REC QUALITY:

This option determines the image quality to be recorded. The DVR stores images in the compressed format and allows the image quality to be altered by the image size. There are 4 levels of image quality you can select from: BEST, HIGH, STANDARD, and BASIC. Selecting the BEST image for use provides higher-resolution recorded images, and normally takes up more storage space than a HIGH, STANDARD or BASIC image does.

DISK FULL:

This option determines the way to utilize storage media in case of a full disk.

REWRITE: When the hard-disk is full, the device continues recording by displacing the old data.

STOP: When the hard-disk is full, the device will stop recording.

*About the location of the buttons, please refer to Page 10 2.1 Front View.

41