JVC VR 601 instruction manual Slow Forward/Reverse, Play Back Picture-by-picture

Page 31

NOTE: When Normal playing a recorded video from a multiplexer at 60 F/S~30F/S (50F/S~25F/S for PAL), the playback speed is half at recorded speed

NOTE: The playback speed will be displayed on the screen. However, when playing a recorded video from a multiplexer, the playback speed will only display in encoding (multiplexing) the mode. Press the Monitor button to switch between decoding and encoding modes.

4.3.2 Slow Forward/Reverse

There are 4 speeds available for a slow playback: 1/2, 1/4, 1/8, 1/16.

While playing back recorded video at the recorded speed:

(1)Press the PAUSE button for the slow playback mode.

(2)Forward: Turn the Shuttle dial to the right to view the recorded video in the forward direction at a speed slower than the recorded speed. Each subsequent turn of the shuttle to the right increases the forward rate, as 1/2, 1/4, 1/8, and 1/16.

(3)Reverse: Turn the Shuttle dial to the left to view the recorded video in the reverse direction at a speed slower than the recorded speed. Each subsequent turn of the shuttle to the left increases the reverse rate, as -1/2, -1/4, -1/8, and -1/16.

(4)Normal: Release the Shuttle dial and then press the PLAY button to return to the normal speed of playback.

*You can also operate by using “<” button and “>” button .

4.3.3Play Back Picture-by-picture

While playing back recorded video at the recorded speed:

(1)Press the PAUSE button for the picture-by-picture mode.

(2)There are two ways, by PAUSE button or by JOG, available to play in the picture-by-picture mode, but the PAUSE button can only function in a forward direction; the other, JOG dial , can act in both a forward and a backward direction, as well as picture-by-picture.

By PAUSE button :

Press the PAUSE button to display one frame/field of a picture at a time in the forward direction. (When playing back video recorded by a multiplexer, each sequential press of the PAUSE button will display each camera in sequence.)

By JOG dial :

Turn the JOG dial clockwise to display one frame/field of a picture at a time in the forward direction. Turn the JOG dial counterclockwise to display one frame/field of a picture at a time in the backward direction.

(3)Press the PLAY button to return to the normal speed of playback.

*About the location of the buttons, please refer to Page 10 2.1 Front View.

31

Image 31
Contents Digital Video Recorder Important Safeguards Avertissement Safety Precautions for USA and CanadaConnection to the mains supply Power SystemFor Your Safety Australia Important In the United Kingdom Mains Supply AC 230Place of storage and use About the provided power cables for VR-601 UHandling the unit AC adapter section Important Safety InstructionsTable Of Contents Specifications Compatible Multiplexers Product Introduction Product FeaturesOperate button Front ViewHard-disk drive compartment Hard-disk compartment lockUp / Down buttons Rec IndicatorDisk Indicator Operate IndicatorMobile Rack HDD LED Mobile Rack Power LEDRear View This Figure is Looked from the Rear Alarm In/OutNo Connection Connectiong to the AC Adapter Basic ConnectionMemo Connecting with a Multiplexer Connecting with a Single CameraMultiplexer Connecting with a QuadClock SET Attaching AN External Device to DVRMaxtor Hard-Disk Drive InstallationQuality Best Ntsc Rate 6 HR System InformationMUX OFF Size POS Updating System Software Standard Configuring Recording SettingsBest HighNtsc MUX OFF PAL MUX OFF Recording Operations Timer RecordingManual Recording Start END 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 M 0000-0000 WREC Quality Best Audio OFF ALM Type ALM Duration Alarm RecordingPRE- Alarm OFF Main Alarm REC Enable Externally triggered RecordingDiagrams below Search to play back a particular recorded video Operation Status From REC mode to Playback modePlayback Operations Fast Forward/ReverseSlow Forward/Reverse You can also operate by using button and buttonPlay Back Picture-by-picture Full List Search Search Full List Alarm List Time Search Thumbnail SD CardSearch Operations Play Back Recorded Video from a HDD of the mobile rackSearch Alarm list SearchAlarm List Time SearchSearch Thumbnail Year Full List Thumbnail Search2003 SD Card Search Alarm Select Main Backup ALL to HD2 Backup OperationsMobile Rack HD Backup Backup Backup Main SET HD2 Usage1220 2001-02-01 0330 2001-03-02 0420 1330 Alarm Select Main Backup Alarm to HD2Disk Setting Reformat HD2 Usage Search buttonArchive Single image Clips into SD Card Security Digital Card SD Card BackupBackup the System setting info into SD Card Save the whole setting into the SD cardKey Lock Operation Transfer the system setting info of DVR to anotherMenu Setup REC Quality REC SettingAlarm Setting REC Quality PRE- Alarm REC Schedule Clock / TimerClock / Timer SET REC Enable OFF Main Timer REC Enable TimerNET Enable NET Enable OFF NET Dhcp NET IP SET FTP Setting MainCommunication REC Mode Comm Setting FTP Setting Comm IDEnable REC Mode Alarm RECPath PasswordFTP Account FTP IP UserBackup Disk SettingBackup Full Main Disk REFORMAT/CLEAR Backup HD HD2 UsageSystem Situation MAC 00 0c 0c 00 00 Bios SW 1.00J Date Jun 9 General Command Format SetupCommunication Protocol Value of a specific front panel key Description of System State Request Time Second Category=0x02Set Time Second Category=0x02 Request State Second Category=0x06Jumper settings of hard-disk drives for the system Location Mobile Rack InstallationPage Push the active-handle inward Lock the Key System Default SET RS232 / RS485 Disk Setting ReformatD Message Meanings PIN no Network ViewerPage View the VR-601 video from a remote PC Function Buttons Description Viewing images View all the connected devicesView single device Playback function bar Set the record timer Change the Record & Timer Properties Via the NetworkSet the regular record settings Set the Alarm record settingsArchive Images to the Computer Image Viewer Point stops recording Previously recorded data remaining 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03Connect to a LAN Hub Intranet Physical specification of RJ-45 cable for EthernetCable Connections Connect to a computerConnect to WAN Internet RJ-45 PIN configuration for LAN HubConfigure Your DVR Network Settings Enable DVR Network FunctionSet IP Address Enable Dhcp Function12.3 TCP/IP Communication Software Page 12.5 TCP/IP Configuration setting 12.4 TCP/IP installationClick Start Settings Control Panel Network Click Start Programs MS-DOS Prompt Connection TestingPage Model Number VR-601 U VR-601 E Design and specifications subject to change without noticeDVR Viewer Manufacturer Model ChannelColors Decode on