JVC VR 601 Disk Setting, Rec, Backup Full Main Disk REFORMAT/CLEAR, Backup HD HD2 Usage

Page 49
Clears out all the data stored in HD 1 and HD 2.
Clears out all the data stored in HD 2, which is set to backup purpose only. (This function has to be proceeded with when the HD 2 USAGE option is set to BACKUP.)

5.5 DISK SETTING

MAIN MENU

RECORD

ALARM

CLOCK / TIMER

COMMUNICATION

DISK

SYSTEM

GOTO DISK PAGE

REFORMAT:

DISK SETTING

REFORMAT

 

: HD 1 2

HD 2 USAGE

 

: REC

BACKUP

: FULL

MAIN PAGE

DISK REFORMAT/CLEAR

This option allows you to clear out all the data in the hard-disk drive. You will be required to enter the pre-set password before proceeding with clearing out the data. Enter the standard password “9999” if you don’t set your individual password. To set your individual password, please refer to section 5.6 PASSWORD option.

HD 1 2:

BACKUP HD:

HD2 USAGE:

This option determines the way to utilize the hard-disk drive in the mobile compartment.

BACKUP: Used for data backup only, which will not be part of regular recording hard-disk drive.

REC: Used for the regular recording hard-disk drive.

NOTE: When you wish to play back a recorded video from a HD2, this option must be set to REC. For more details, please refer to section 4.3.4.

BACKUP:

This function allows you to duplicate data from HD 1 to HD 2. Please set HD 2 as BACKUP first. (For operation details, please refer to section 4.5.1)

FULL: Duplicates all the recorded video from HD1 to HD2.

ALARM: Duplicates all the alarm-event recorded video from HD 1 to HD2

SELECT: Duplicates a particular recorded video from HD1 to HD2.

49

Image 49
Contents Digital Video Recorder Important Safeguards Avertissement Safety Precautions for USA and CanadaFor Your Safety Australia Power SystemImportant In the United Kingdom Mains Supply AC 230 Connection to the mains supplyPlace of storage and use About the provided power cables for VR-601 UHandling the unit AC adapter section Important Safety InstructionsTable Of Contents Specifications Compatible Multiplexers Product Introduction Product FeaturesHard-disk drive compartment Front ViewHard-disk compartment lock Operate buttonDisk Indicator Rec IndicatorOperate Indicator Up / Down buttonsMobile Rack HDD LED Mobile Rack Power LEDRear View This Figure is Looked from the Rear Alarm In/OutNo Connection Connectiong to the AC Adapter Basic ConnectionMemo Connecting with a Multiplexer Connecting with a Single CameraMultiplexer Connecting with a QuadClock SET Attaching AN External Device to DVRMaxtor Hard-Disk Drive InstallationQuality Best Ntsc Rate 6 HR System InformationMUX OFF Size POS Updating System Software Best Configuring Recording SettingsHigh StandardNtsc MUX OFF PAL MUX OFF Recording Operations Timer RecordingManual Recording Start END 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 M 0000-0000 WPRE- Alarm OFF Main Alarm REC Enable Alarm RecordingExternally triggered Recording REC Quality Best Audio OFF ALM Type ALM DurationDiagrams below Playback Operations Operation Status From REC mode to Playback modeFast Forward/Reverse Search to play back a particular recorded videoSlow Forward/Reverse You can also operate by using button and buttonPlay Back Picture-by-picture Search Operations Search Full List Alarm List Time Search Thumbnail SD CardPlay Back Recorded Video from a HDD of the mobile rack Full List SearchAlarm List Alarm list SearchTime Search SearchSearch Thumbnail Year Full List Thumbnail Search2003 SD Card Search Mobile Rack HD Backup Backup OperationsBackup Backup Main SET HD2 Usage Alarm Select Main Backup ALL to HD2Disk Setting Reformat HD2 Usage Alarm Select Main Backup Alarm to HD2Search button 1220 2001-02-01 0330 2001-03-02 0420 1330Backup the System setting info into SD Card Security Digital Card SD Card BackupSave the whole setting into the SD card Archive Single image Clips into SD CardKey Lock Operation Transfer the system setting info of DVR to anotherMenu Setup REC Quality REC SettingAlarm Setting REC Quality PRE- Alarm Clock / Timer SET REC Enable OFF Main Timer REC Enable Clock / TimerTimer REC ScheduleNET Enable NET Enable OFF NET Dhcp NET IP SET FTP Setting MainCommunication Enable Comm Setting FTP Setting Comm IDREC Mode Alarm REC REC ModeFTP Account FTP IP PasswordUser PathBackup Full Main Disk REFORMAT/CLEAR Disk SettingBackup HD HD2 Usage BackupSystem Situation MAC 00 0c 0c 00 00 Bios SW 1.00J Date Jun 9 General Command Format SetupCommunication Protocol Value of a specific front panel key Set Time Second Category=0x02 Request Time Second Category=0x02Request State Second Category=0x06 Description of System StateJumper settings of hard-disk drives for the system Location Mobile Rack InstallationPage Push the active-handle inward Lock the Key System Default SET RS232 / RS485 Disk Setting ReformatD Message Meanings PIN no Network ViewerPage View the VR-601 video from a remote PC Function Buttons Description Viewing images View all the connected devicesView single device Playback function bar Set the regular record settings Change the Record & Timer Properties Via the NetworkSet the Alarm record settings Set the record timerArchive Images to the Computer Image Viewer Point stops recording Previously recorded data remaining 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03Cable Connections Physical specification of RJ-45 cable for EthernetConnect to a computer Connect to a LAN Hub IntranetConfigure Your DVR Network Settings RJ-45 PIN configuration for LAN HubEnable DVR Network Function Connect to WAN InternetSet IP Address Enable Dhcp Function12.3 TCP/IP Communication Software Page 12.5 TCP/IP Configuration setting 12.4 TCP/IP installationClick Start Settings Control Panel Network Click Start Programs MS-DOS Prompt Connection TestingPage Model Number VR-601 U VR-601 E Design and specifications subject to change without noticeColors Manufacturer Model ChannelDecode on DVR Viewer