DTS RV4700 DTS-ES manual Universal Remote Controls, LED Lamp Device Buttons

Page 10

Universal Remote Controls

Note

•For enhanced Universal Remote Programming instructions and manufacturer’s codes, please refer to the operating manual inclosed with this Universal Remote Control.

Notes:

•The setup code for each component must be entered before operation.

•For setup codes(manufacturer’s codes), please refer to “Set-Up Code Tables” in the operating manual of this remote control.

•Some operation buttons have different functions according to each operation mode.

•Be sure to set the remote control to the correct mode before operation.

LED LAMP

DEVICE BUTTONS

To operate the desired component with this remote control, first select the corresponding DEVICE button.

DVD

POWER BUTTON

ENTER BUTTON

NUMERIC(1~0) BUTTONS

•For selecting preset stations in tuner mode.

•For selecting a track or a disc in CD mode, etc.

•When selecting a disc, select disc No. (1~5) within 2 sec. after pressing DISC(marked "P.SCAN") button.

LIGHT BUTTON

Activates the backlighting of the remote control for 7 sec. If any other button is pressed while the backlighting is on, the remote control will remain backlit for an additional 7 sec.

		VOLUME UP/DOWN( / ) BUTTONS
VOL.	CH LEVEL	CHANNEL LEVEL UP/DOWN( / )
		BUTTONS
OSD	CH SEL

ENTER	CURSOR CONTROL(	,	,	,	)
RPT	BUTTONS
RPT	INTRO
A	B
TITLE
7.1 SURR	RETURN

		AUTO
		DSP
		MODE
		ST
DISC	TEST	CENTER
P.SCAN	TONE	MODE

TUNER CD T1/MON AUX PHONO

VID1 VID2 VID3 VID4 VID5

SYS DISP SLEEP DIRECT IN ROOM2

HOME THEATER MASTER

RV4700 DTS-ES

10

Image 10

Contents RV4700 DTS-ES Unpacking and Installation IntroductionRead this Before Operating Your Unit AC Voltage SelectionContents Connecting 7.1CH Direct INPUTs Connecting Antennas Connecting Audio ComponentsSystem Connections Connecting Video Components Front SUR Round BackConnecting Digital INs and OUT Connecting MULTI-ROOM System KITPRE OUT connections AC Inlet Connecting Speakers Switched AC OutletRoom 2 connections Front Panel Controls Fluorescent DisplayUniversal Remote Controls LED Lamp Device ButtonsFunction Table of the Numbered Buttons Remote Control Operation Range Loading BatteriesAdditional Information on Remote Command Codes Functions CodesEntering a Setup Code For Power ON/OFFBefore operation When selecting the 7.1 CH Direct as desiredOperations Tape Monitor functionWhen CD, Tape MON or Video 1~ Video 4 is selected Adjusting the tone bass and trebleSound tracks Surround Sound Surround modesHall 1/2 TheaterMovie StadiumSurround left and right speakers Speaker placementFront left and right speakers and center speaker Surround back left and right speakersSelected decoding mode as follows Enjoying Surround SoundWhen canceling the surround mode for normal stereo operation Adjusting each channel level Select the desired channelDownmixing into 2 front channels Presetting radio stations Auto tuningManual tuning Listening to Radio BroadcastsTuning to preset stations Scanning preset stations in sequenceAdditional Function for RV4700 DTS-ES RDS Tuner Only Listening to RDS Broadcastsfm onlyEON PTY EON Enhanced Other Networks InformationRecording with Tape Monitor Dubbing the sound and image signalsRecording Dubbing from video components ontoDigital Audio Recording with MD Recorder Other Functions Operating the sleep timerAdjusting the brightness of the fluorescent displays Compressing the dynamic range Dolby Digital sources onlyEntering a video label Correcting or clearing a video labelRoom 2 Source Playback When selecting the desired input source Using the OSDOSD Menu Settings Current Status DisplayWhen selecting the Function Select When selecting the Speaker SetupWhen selecting the Surround Setup When selecting the CH Level TrimSetting the Speaker Setup When selecting the Speaker ConfigWhen selecting the Speaker Distance When selecting the LFE Level Control When selecting the Input Setup Setting the Function SelectWhen selecting the Digital in Setup When selecting the Video Select When selecting the Tone Control When selecting the OSD Mode When selecting the Source Direct Setting the Surround SetupWhen selecting the Cinema EQ When selecting the Decoding Mode When selecting the surround modeSetting the CH Level Trim Setting the ROOM2 Feed Setup When selecting the Volume ModeWhen selecting the Function Select for Room When the Room 2 Feed mode is set to OnTroubleshooting Guide Problem Possible Cause RemedySpecifications RV4700 DTS-ES