DTS RV4700 DTS-ES manual Recording with Tape Monitor, Dubbing from video components onto

RECORDING

•The analog signals from the 7.1 CH DIRECT inputs as well as the digital signals from the coaxial or optical digital input can be heard but cannot be recorded.

•The volume, tone (bass, treble) settings,etc. have no effect on the recording signals.

Recording with TAPE MONITOR				Start recording on the TAPE MONITOR.
				2
1	Select the desired input as recording source
	except TAPE MONITOR.
AUDIO	VIDEO			Start play on the desired input.
	or			3
	TUNER	CD	AUX
	VID1	VID2	VID3 VID4
				• For tape monitor function, refer to “TAPE
• Be sure that “TAPE MON” goes off.				MONITOR function” on page 15.
Dubbing from video components onto				Start recording on the VIDEO 1.
				2
VIDEO 1
1	Select VIDEO 2, VIDEO 3 or VIDEO 4
	as a recording source.			Start play on the VIDEO 2, VIDEO 3 or
	VIDEO			3 VIDEO 4.
	or			• The audio and video signals from the VIDEO 2,
				VIDEO 3 or VIDEO 4 will be dubbed onto the
	VID2	VID3	VID4	VIDEO 1 and you can enjoy them on the TV set and
				from the speakers.
Dubbing the sound and image signals				Select CD as an sound recording source.
				2
separately onto VIDEO 1
Example) When dubbing the VIDEO 2 image signal and
the CD sound signal separately onto VIDEO 1.				AUDIO
1	Select VIDEO 2 as a image recording			or
	source.			CD
	VIDEO
	or
		VID2
				Image source Sound source

Image source Sound source

29