DTS RV4700 DTS-ES manual Listening to Radio Broadcasts, Auto tuning, Manual tuning

LISTENING TO RADIO BROADCASTS

Auto tuning	2	Select the desired band.
Select the tuner.
		BAND
1
		BAND		FREQUENCY
AUDIO
VOL.	CH LEVEL
or	• Each time this button is pressed, the band changes as
	follows :
	FM Stereo mode		FM Mono mode AM
TUNER	(“STEREO” lights up )		(“ STEREO” goes off)
HOME THEATER MASTER
RV4700 DTS-ES
	• When FM stereo broadcasts are poor because of weak
	broadcast signals, select the FM mono mode to
	reduce the noise, then FM broadcasts are reproduced
	in monaural sound.
	• When pressing the BAND button without selecting
	the TUNER, the tuner will be selected automatically.
Select the tuning mode.		Press the TUNING/PRESET UP( ) or
3	4	DOWN(	) button for more than 0.5 second.
			TUNING/PRESET
T/P MODE

• Each time this button is pressed, the mode changes				• Then “ AUTO” appears on the display. The tuner
	as follows:			will now search until a station of sufficient strength
		Tuning mode : “PRESET” goes off.		has been found. The display shows the tuned
		Preset mode : “PRESET” lights up.		frequency and “TUNED”.
				• If the station found is not the desired one, simply
				repeat this operation.
				• Weak stations are skipped during auto tuning.
	Manual tuning
					TUNING/PRESET
• Manual tuning is useful when you already know the frequency of the desired
	transmitter.
• Perform the steps ~			in “Auto tuning” procedure and press the
	TUNING/PRESET UP(		) or DOWN( )button repeatedly until the right

frequency has been reached.

Presetting radio stations

•You can store up to 30 preferred stations in the memory.

1	Tune in the desired station with auto or
	manual tuning.

Press the MEMORY/ENTER button.

2

MEMO/ENTER

• “MEMO” is flickering for 5 seconds.

25