DTS RV4700 DTS-ES manual Sound tracks

Page 17

	To achieve the pure sound quality.			To compensate for edgy or shrill movie
9	SOURCE			10 sound tracks.
	DIRECT			CINEMA EQ
				CINEMA EQ

• Only when playing program sources recorded in	• When 96 kHz PCM(2 channel stereo) signals are
analog stereo or digital 2 ch PCM format, the source	input or the source direct function is selected. the
direct function can be selected.	cinema EQ function can not be selected.
• “DIRECT” lights up and stereo mode is	• “CINEMA-EQ ON” will be scrolled.
automatically selected. Then the pure sound that	• Press it again to cancel, then “CINEMA-EQ OFF”
bypasses the tone circuitry will be heard.	will be scrolled.

•Press it again to cancel the source direct function.

•When you select the 7.1 CH DIRECT as input source or the digital signals from DTS, Dolby Digital or MPEG sources, etc. are input, the source direct function is automatically canceled.

To mute the sound.	To listen with the headphones.
11	12
	PHONES
VOL. CH LEVEL

HOME THEATER MASTER
RV4700 DTS-ES
	• Ensure that the SPEAKER button is set to off.
	• When listening to DTS, Dolby Digital or MPEG
• “MUTE” lights up.	program source, if the headphones are plugged and
• To resume the previous sound level, press it again.	the SPEAKER button is set to off, it enters the 2-CH
	downmix mode automatically. (For details, refer to
	“Downmixing into 2 front channels” on page 24.)

17

Image 17

Contents RV4700 DTS-ES Introduction Unpacking and InstallationAC Voltage Selection Read this Before Operating Your UnitContents System Connections Connecting Antennas Connecting Audio ComponentsConnecting 7.1CH Direct INPUTs Front SUR Round Back Connecting Video ComponentsPRE OUT connections Connecting MULTI-ROOM System KITConnecting Digital INs and OUT Room 2 connections Switched AC OutletAC Inlet Connecting Speakers Fluorescent Display Front Panel ControlsLED Lamp Device Buttons Universal Remote ControlsFunction Table of the Numbered Buttons Loading Batteries Remote Control Operation RangeFunctions Codes Additional Information on Remote Command CodesFor Power ON/OFF Entering a Setup CodeOperations When selecting the 7.1 CH Direct as desiredBefore operation Tape Monitor functionAdjusting the tone bass and treble When CD, Tape MON or Video 1~ Video 4 is selectedSound tracks Surround modes Surround SoundMovie TheaterHall 1/2 StadiumFront left and right speakers and center speaker Speaker placementSurround left and right speakers Surround back left and right speakersEnjoying Surround Sound Selected decoding mode as followsWhen canceling the surround mode for normal stereo operation Select the desired channel Adjusting each channel levelDownmixing into 2 front channels Manual tuning Auto tuningPresetting radio stations Listening to Radio BroadcastsScanning preset stations in sequence Tuning to preset stationsListening to RDS Broadcastsfm only Additional Function for RV4700 DTS-ES RDS Tuner OnlyInformation EON PTY EON Enhanced Other NetworksRecording Dubbing the sound and image signalsRecording with Tape Monitor Dubbing from video components ontoDigital Audio Recording with MD Recorder Adjusting the brightness of the fluorescent displays Operating the sleep timerOther Functions Compressing the dynamic range Dolby Digital sources onlyCorrecting or clearing a video label Entering a video labelRoom 2 Source Playback OSD Menu Settings Using the OSDWhen selecting the desired input source Current Status DisplayWhen selecting the Surround Setup When selecting the Speaker SetupWhen selecting the Function Select When selecting the CH Level TrimWhen selecting the Speaker Config Setting the Speaker SetupWhen selecting the Speaker Distance When selecting the LFE Level Control When selecting the Digital in Setup Setting the Function SelectWhen selecting the Input Setup When selecting the Video Select When selecting the Tone Control When selecting the OSD Mode When selecting the Cinema EQ Setting the Surround SetupWhen selecting the Source Direct When selecting the surround mode When selecting the Decoding ModeSetting the CH Level Trim When selecting the Volume Mode Setting the ROOM2 Feed SetupWhen the Room 2 Feed mode is set to On When selecting the Function Select for RoomProblem Possible Cause Remedy Troubleshooting GuideSpecifications RV4700 DTS-ES