Sharp LC32LE450U, LC-32LE450U When using coaxial cable, When using Hdmi cable INPUT1

Connecting to External Equipment

•When using coaxial cable:

It is possible to output audio through the DIGITAL AUDIO terminal. PCM audio out )uts from the terminal.

coaxial Cable

f

•Digital Audio output is not available when using an HDMI input.

•Using analog audio connection by headphone jack when connecting to sound bar or external speaker.

HD Cable/Satellite set-top box

_

_dH

•If the image is not in sync with the audio, check the settings of the connected surround system.

•Letting the TV output the audio to an AV amplifier.

Connecting to External Equipment

Refer to page 39 for a list of PC signals compatible with the TV:.

•When using HDMI cable (INPUT1, 2):

_2.\_.<_-.._

HDMbcertified cable

•The HDMI terminals only support digital signal.

•When using DVI-HDMI conversion cable (INPUT1):

G 3.5 mm stereo minijack cable

DVI-HDMI conversion cable

•When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to connecting a DVI-HDMI conversion cable to the INPUT 1(HDMI) terminal, connect a

© 3.5 mm stereo minijack cable to the AUDIO PC/HDMI terminal.

•When using analog RGB cable (PC IN):

Analog RGB cable_lI _"_,_

_.................-	-'t	ilil
	(D-sub 1S-pin cable or VGA cable)	__._._..._

• When using an analog RGB cable, input the audio signal to the AUDIO PC/HDMI terminal of PC IN.

Q- 18 Q- 19