Sharp LC-32LE450U, LC32LE450U operation manual Quick Reference, Power

QUICK REFERENCE

1. Attach your antenna	to the back of the	3. When	turning	on the TV for the first time,
television. (See page	10.)	press	POWER	on the television.

2.Connect the AC plug for the television into the AC outlet.

QUICK REFERENCE

Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.

• Cautions regarding the remote control unit

• Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.

•Place the TV close to the AC outlet, and keep the power plug within reach.

•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.

/\

cH

+

VOL

MENU

INPUT

POWER

4.Insert the batteries into the remote control unit. (See page 11 .)

•Speakers cannot be detached from the TV:.

•The TV angle cannot be adjusted.

• Do not install or place the remote control

unit under direct sunlight. The heat may cause deformation of the remote control unit.

• The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or the TV, or operate the remote control unit closer to the remote control

sensor

• i

,"JT-_.,>. _'_/

•.::%__ /

t t_ */' / * The angle is 17 _ when the stand is attached.

IMPORTANT:

If the POWER indicator light on the television still does not turn off, press POWER on the remote control to turn the power on.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARR