Eiki LC-XC1 owner manual Reset Mode free Stored Quit

Page 27

LC-XC1

The number of the total vertical lines. Adjust the number to match the image of your personal computer.

The number of the total dots in one horizontal period. Adjust the number to match the image of your computer.

Adjustment of the horizontal or vertical picture position. When the image is not centered on the screen, adjust each of those

items.

Adjustment of the clamp level. When the image has a dark bar(s), try this adjustment.

Adjust the picture as necessary to eliminate flicker from the display.

Adjustment of the area displayed with this projector. Select the resolution at the Display area dialog box, or adjust the number at the column of “H” or “V” to match the resolution of the image.

Adjustment 01 tne norizontai height or vertical wicitn 01 tne image.

NOTE : The Display area, the Horiz. scale and the Vert. scale cannot be adjusted when “HDTV1O35i” or “HDTV1O8Oi” is

selected on SYSTEM MENU (P24 and 25).

Each of the keys operates as follow.

Reset •.

Mode free I

Stored I

Quit

Recalls the parameter data that was previously adjusted.

Clears the parameter data previously set.

Stores the parameters in the memory.

Closes PC ADJUST MENU.

27

Image 27

Contents Model LC-XC1 To the Owner Safety Instructions Compliances Table of Contents Color Systems Progressive scan signals and provide fine picture qualityProjector and computer with this Remote Control Unit only IBM-compatible and Macintosh computers up toLC-XC1 Projector side AC Outlet side Room Light Positioning the ProjectorLatches on both sides of the projector Adjustable FeetInput Terminals Refer to Reset function excessivelyWhen using the Wired / Wireless This projector uses a micro processor to controlLC-XC1 LC-XC1 Indicators Laser Pointer Function Compartment lid ReplaceFlow of ON-SCREEN Menu Menu BAR Appliance cannot be turned on Turn the Main on I OFF Switch to ON. The Lamp indicatorTurning on the Projector Turning OFF the ProjectorPress the Zoom !/∀buttons on the Top Control or on Zoom AdjustmentFocus Adjustment Lens Shift Adjustment∀button or the Point UP/DOWN buttons. Press Keystone AdjustmentTimer function Picture Freeze FunctionMenu Operation Direct Operation System Menu will appear To set the Computer system manually, select the mode on No signal Automatic MULTI-SCAN SystemCompatible Computer Specifications Point UP/DOWN button and the Select button. To Reset Mode free Stored Quit Closes Image Menu Recalls the data previously adjustedReset Stores the adjusted data in the memoryNormal Function Setting data in the memory LEFT/RIGHT buttons, and then press the Select buttonCloses This projector cannot display any ∀, SELECT, Right CLICK, or Point button. To adjustDisplayed. Correct the Keystone distortion by pressing Menu P24Direct Operation Menu OperationVideo I S-Video / Y, PbICb, Pr/Cr Video Signal from Y, Pb/Cb, Pr/Cr Jacks Video Signal from Video Jack or S-VIDEO JackProgressive CustomColor Noise reductionWide RegularPower off? message DisplayBlue back Returns to the normal code Mode Remote controlSet the Remote control in Setting Menu to Mode To return to the normal code Mode 1, operate both projectorNot work properly InstallationOperating Wireless Mouse ConnectionTemperature Warning Indicator AIR Filter Care and CleaningParticles, it will reduce the Cooling Fans’ Cover Lamp Replacement Monitor TimerCleaning ThE Projection Lens No image Picture isTop/Bottom Reversed Some displays are not Seen duringCabinet Signal Scanning Frequency Dimensions W x H x DNet Weight Panel ResolutionTerminal Mini DIN 8-PIN MAC AdapterTerminal HDB1 5-PIN Terminal DVI 24-pinEiki Deutschland Gmbh