Eiki LC-XC1 Video Signal from Video Jack or S-VIDEO Jack, Video Signal from Y, Pb/Cb, Pr/Cr Jacks

Page 33

LC-XC1

1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SYSTEM and press the SELECT button. Another dialog box

VIDEO SYSTEM MENU will appear.

2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to “Auto”, and then press the SELECT

button.

VIDEO SIGNAL FROM VIDEO JACK OR S-VIDEO JACK

Auto

The projector automatically detects the incoming Video system, and adjusts itself to optimize its performance.

When the Video System is PAL-M or PAL-N, select the system manually.

PAL I SECAM I NTSC I NTSC4.43 I PAL-M / PAL-N

If the projector cannot reproduce the proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

VIDEO SIGNAL FROM Y, Pb/Cb, Pr/Cr JACKS

Auto

The projector automatically detects the incoming Video signal, and

adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce the proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 48Op, 575p, 720p, i035i and iO8Oi.

33

Image 33

Contents Model LC-XC1 To the Owner Safety Instructions Compliances Table of Contents Projector and computer with this Remote Control Unit only Progressive scan signals and provide fine picture qualityIBM-compatible and Macintosh computers up to Color SystemsLC-XC1 Projector side AC Outlet side Room Light Positioning the ProjectorLatches on both sides of the projector Adjustable FeetInput Terminals When using the Wired / Wireless Reset function excessivelyThis projector uses a micro processor to control Refer toLC-XC1 LC-XC1 Indicators Laser Pointer Function Compartment lid ReplaceFlow of ON-SCREEN Menu Menu BAR Turning on the Projector Turn the Main on I OFF Switch to ON. The Lamp indicatorTurning OFF the Projector Appliance cannot be turned onFocus Adjustment Zoom AdjustmentLens Shift Adjustment Press the Zoom !/∀buttons on the Top Control or onTimer function Keystone AdjustmentPicture Freeze Function ∀button or the Point UP/DOWN buttons. PressMenu Operation Direct OperationNo signal To set the Computer system manually, select the mode onAutomatic MULTI-SCAN System System Menu will appearCompatible Computer Specifications Point UP/DOWN button and the Select button. To Reset Mode free Stored Quit Reset Recalls the data previously adjustedStores the adjusted data in the memory Closes Image MenuNormal Function Setting data in the memory LEFT/RIGHT buttons, and then press the Select buttonCloses Displayed. Correct the Keystone distortion by pressing ∀, SELECT, Right CLICK, or Point button. To adjustMenu P24 This projector cannot display anyDirect Operation Menu OperationVideo I S-Video / Y, PbICb, Pr/Cr Video Signal from Y, Pb/Cb, Pr/Cr Jacks Video Signal from Video Jack or S-VIDEO JackColor CustomNoise reduction ProgressiveWide RegularPower off? message DisplayBlue back Set the Remote control in Setting Menu to Mode Remote controlTo return to the normal code Mode 1, operate both projector Returns to the normal code ModeOperating Wireless Mouse InstallationConnection Not work properlyTemperature Warning Indicator AIR Filter Care and CleaningParticles, it will reduce the Cooling Fans’ Cover Lamp Replacement Monitor TimerCleaning ThE Projection Lens Top/Bottom Reversed Some displays are not Picture isSeen during No imageCabinet Net Weight Dimensions W x H x DPanel Resolution Signal Scanning FrequencyTerminal HDB1 5-PIN MAC AdapterTerminal DVI 24-pin Terminal Mini DIN 8-PINEiki Deutschland Gmbh