Eiki LC-XC1 owner manual Positioning the Projector, Room Light

Page 9

LC-XC1

POSITIONING THE PROJECTOR

•This projector is designed to project on a flat projection surface.

•The projector can be focused from 4.6’ (1 .4m) 47.3’ (1 4.4m),

•Refer to the figure below to adjust the screen size.

ROOM LIGHT

The brightness in the room has a great influence on the picture quality. It is recommended to limit ambient lighting in order to provide the best image.

LENS SHIFT ADJUSTMENT

The projection lens can be moved up and down with the motor-driven lens shift function. This function makes it easy to provide the projected image where you want. The U/D ratio can be adjusted 10 : 0 1: 3 (refer to the figure below.). Refer to P 21 for operation.

Image 9

Contents Model LC-XC1 To the Owner Safety Instructions Compliances Table of Contents Projector and computer with this Remote Control Unit only Progressive scan signals and provide fine picture qualityIBM-compatible and Macintosh computers up to Color SystemsLC-XC1 Projector side AC Outlet side Room Light Positioning the ProjectorLatches on both sides of the projector Adjustable FeetInput Terminals When using the Wired / Wireless Reset function excessivelyThis projector uses a micro processor to control Refer toLC-XC1 LC-XC1 Indicators Laser Pointer Function Compartment lid ReplaceFlow of ON-SCREEN Menu Menu BAR Turning on the Projector Turn the Main on I OFF Switch to ON. The Lamp indicatorTurning OFF the Projector Appliance cannot be turned onFocus Adjustment Zoom AdjustmentLens Shift Adjustment Press the Zoom !/∀buttons on the Top Control or onTimer function Keystone AdjustmentPicture Freeze Function ∀button or the Point UP/DOWN buttons. PressMenu Operation Direct OperationNo signal To set the Computer system manually, select the mode onAutomatic MULTI-SCAN System System Menu will appearCompatible Computer Specifications Point UP/DOWN button and the Select button. To Reset Mode free Stored Quit Reset Recalls the data previously adjustedStores the adjusted data in the memory Closes Image MenuNormal Function Setting data in the memory LEFT/RIGHT buttons, and then press the Select buttonCloses Displayed. Correct the Keystone distortion by pressing ∀, SELECT, Right CLICK, or Point button. To adjustMenu P24 This projector cannot display anyDirect Operation Menu OperationVideo I S-Video / Y, PbICb, Pr/Cr Video Signal from Y, Pb/Cb, Pr/Cr Jacks Video Signal from Video Jack or S-VIDEO JackColor CustomNoise reduction ProgressiveWide RegularPower off? message DisplayBlue back Set the Remote control in Setting Menu to Mode Remote controlTo return to the normal code Mode 1, operate both projector Returns to the normal code ModeOperating Wireless Mouse InstallationConnection Not work properlyTemperature Warning Indicator AIR Filter Care and CleaningParticles, it will reduce the Cooling Fans’ Cover Lamp Replacement Monitor TimerCleaning ThE Projection Lens Top/Bottom Reversed Some displays are not Picture isSeen during No imageCabinet Net Weight Dimensions W x H x DPanel Resolution Signal Scanning FrequencyTerminal HDB1 5-PIN MAC AdapterTerminal DVI 24-pin Terminal Mini DIN 8-PINEiki Deutschland Gmbh