Eiki LC-XC1 owner manual Regular, Wide

Page 35

LC-XC1

NORMAL FUNCTION

The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote Control Unit). The “Standard” display will be displayed on the screen for a few seconds.

This projector has a picture screen resize function, which enables you to display the desirable image size.

1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT button. Another dialog box SCREEN MENU will appear.

2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the screen size that you want to set, and then press the SELECT button.

Regular

Normal Video Image size with 4 x 3 aspect ratio.

Wide

Resizes the image for wide screen size with 16 x 9 aspect ratio.

Keystone

When the image is distorted vertically, select Keystone in the dialog box. Correct the Keystone distortion by pressing KEYSTONE A/V button or POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT on page 20.

NOTE:The Regular and the Wide cannot be operated when “720p,” “1035i,” “1080i-50” or “1080i-60” is selected on SYSTEM MENU (P33).

35

Image 35

Contents Model LC-XC1 To the Owner Safety Instructions Compliances Table of Contents Color Systems Progressive scan signals and provide fine picture qualityProjector and computer with this Remote Control Unit only IBM-compatible and Macintosh computers up toLC-XC1 Projector side AC Outlet side Room Light Positioning the ProjectorLatches on both sides of the projector Adjustable FeetInput Terminals Refer to Reset function excessivelyWhen using the Wired / Wireless This projector uses a micro processor to controlLC-XC1 LC-XC1 Indicators Laser Pointer Function Compartment lid ReplaceFlow of ON-SCREEN Menu Menu BAR Appliance cannot be turned on Turn the Main on I OFF Switch to ON. The Lamp indicatorTurning on the Projector Turning OFF the ProjectorPress the Zoom !/∀buttons on the Top Control or on Zoom AdjustmentFocus Adjustment Lens Shift Adjustment∀button or the Point UP/DOWN buttons. Press Keystone AdjustmentTimer function Picture Freeze FunctionMenu Operation Direct OperationSystem Menu will appear To set the Computer system manually, select the mode onNo signal Automatic MULTI-SCAN SystemCompatible Computer Specifications Point UP/DOWN button and the Select button. To Reset Mode free Stored Quit Closes Image Menu Recalls the data previously adjustedReset Stores the adjusted data in the memoryNormal Function Closes Setting data in the memoryLEFT/RIGHT buttons, and then press the Select button This projector cannot display any ∀, SELECT, Right CLICK, or Point button. To adjustDisplayed. Correct the Keystone distortion by pressing Menu P24Video I S-Video / Y, PbICb, Pr/Cr Direct OperationMenu Operation Video Signal from Y, Pb/Cb, Pr/Cr Jacks Video Signal from Video Jack or S-VIDEO JackProgressive CustomColor Noise reductionWide RegularBlue back Power off? messageDisplay Returns to the normal code Mode Remote controlSet the Remote control in Setting Menu to Mode To return to the normal code Mode 1, operate both projectorNot work properly InstallationOperating Wireless Mouse ConnectionParticles, it will reduce the Cooling Fans’ Temperature Warning IndicatorAIR Filter Care and Cleaning Cover Lamp Replacement Monitor TimerCleaning ThE Projection Lens No image Picture isTop/Bottom Reversed Some displays are not Seen duringCabinet Signal Scanning Frequency Dimensions W x H x DNet Weight Panel ResolutionTerminal Mini DIN 8-PIN MAC AdapterTerminal HDB1 5-PIN Terminal DVI 24-pinEiki Deutschland Gmbh