Eiki LC-XC1 owner manual Zoom Adjustment, Focus Adjustment, Lens Shift Adjustment

Page 21

LC-XC1

ZOOM ADJUSTMENT

1 Press the ZOOM !/∀button(s) on the Top Control or on

the Remote Control Unit. The message “Zoom” is displayed.

2. Press the ZOOM ! button or the POINT UP button to make the image larger, and press the ZOOM ∀ button or the POINT DOWN button to make the image smaller.

FOCUS ADJUSTMENT

1 Press the FOCUS !/∀button(s) on the Top Control or on the

Remote Control Unit. The message “Focus” is displayed.

2 Adjust the focus of the image by pressing the FOCUS !/∀ button(s) or the POINT UP/DOWN button(s).

LENS SHIFT ADJUSTMENT

Press the LENS SHIFT !/∀ button(s) on the Top Control

or the LENS SHIFT button on the Remote Control Unit. The message “Lens shift” is displayed.

Press the LENS SHIFT ! button or the POINT UP button to

move the image up, and press the LENS SHIFT ∀ button or the POINT DOWN button to move the image down.

Refer to P9 for operating range.

Image 21

Contents Model LC-XC1 To the Owner Safety Instructions Compliances Table of Contents Projector and computer with this Remote Control Unit only Progressive scan signals and provide fine picture qualityIBM-compatible and Macintosh computers up to Color SystemsLC-XC1 Projector side AC Outlet side Room Light Positioning the ProjectorLatches on both sides of the projector Adjustable FeetInput Terminals When using the Wired / Wireless Reset function excessivelyThis projector uses a micro processor to control Refer toLC-XC1 LC-XC1 Indicators Laser Pointer Function Compartment lid ReplaceFlow of ON-SCREEN Menu Menu BAR Turning on the Projector Turn the Main on I OFF Switch to ON. The Lamp indicatorTurning OFF the Projector Appliance cannot be turned onFocus Adjustment Zoom AdjustmentLens Shift Adjustment Press the Zoom !/∀buttons on the Top Control or onTimer function Keystone AdjustmentPicture Freeze Function ∀button or the Point UP/DOWN buttons. PressMenu Operation Direct OperationNo signal To set the Computer system manually, select the mode onAutomatic MULTI-SCAN System System Menu will appearCompatible Computer Specifications Point UP/DOWN button and the Select button. To Reset Mode free Stored Quit Reset Recalls the data previously adjustedStores the adjusted data in the memory Closes Image MenuNormal Function Setting data in the memory LEFT/RIGHT buttons, and then press the Select buttonCloses Displayed. Correct the Keystone distortion by pressing ∀, SELECT, Right CLICK, or Point button. To adjustMenu P24 This projector cannot display anyDirect Operation Menu OperationVideo I S-Video / Y, PbICb, Pr/Cr Video Signal from Y, Pb/Cb, Pr/Cr Jacks Video Signal from Video Jack or S-VIDEO JackColor CustomNoise reduction ProgressiveWide RegularPower off? message DisplayBlue back Set the Remote control in Setting Menu to Mode Remote controlTo return to the normal code Mode 1, operate both projector Returns to the normal code ModeOperating Wireless Mouse InstallationConnection Not work properlyTemperature Warning Indicator AIR Filter Care and CleaningParticles, it will reduce the Cooling Fans’ Cover Lamp Replacement Monitor TimerCleaning ThE Projection Lens Top/Bottom Reversed Some displays are not Picture isSeen during No imageCabinet Net Weight Dimensions W x H x DPanel Resolution Signal Scanning FrequencyTerminal HDB1 5-PIN MAC AdapterTerminal DVI 24-pin Terminal Mini DIN 8-PINEiki Deutschland Gmbh