Eiki LC-XC1 owner manual Cleaning ThE Projection Lens

Page 41

LC-XC1

CLEANING ThE PROJECTION LENS

Follow these steps to clean the projection lens:

1 Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens.

Lightly wipe the cleaning cloth over the lens.

When the projector is not in use, replace the lens cover.

Image 41

Contents Model LC-XC1 To the Owner Safety Instructions Compliances Table of Contents Projector and computer with this Remote Control Unit only Progressive scan signals and provide fine picture qualityIBM-compatible and Macintosh computers up to Color SystemsLC-XC1 Projector side AC Outlet side Room Light Positioning the ProjectorLatches on both sides of the projector Adjustable FeetInput Terminals When using the Wired / Wireless Reset function excessivelyThis projector uses a micro processor to control Refer toLC-XC1 LC-XC1 Indicators Laser Pointer Function Compartment lid ReplaceFlow of ON-SCREEN Menu Menu BAR Turning on the Projector Turn the Main on I OFF Switch to ON. The Lamp indicatorTurning OFF the Projector Appliance cannot be turned onFocus Adjustment Zoom AdjustmentLens Shift Adjustment Press the Zoom !/∀buttons on the Top Control or onTimer function Keystone AdjustmentPicture Freeze Function ∀button or the Point UP/DOWN buttons. PressMenu Operation Direct OperationNo signal To set the Computer system manually, select the mode onAutomatic MULTI-SCAN System System Menu will appearCompatible Computer Specifications Point UP/DOWN button and the Select button. To Reset Mode free Stored Quit Reset Recalls the data previously adjustedStores the adjusted data in the memory Closes Image MenuNormal Function Closes Setting data in the memoryLEFT/RIGHT buttons, and then press the Select button Displayed. Correct the Keystone distortion by pressing ∀, SELECT, Right CLICK, or Point button. To adjustMenu P24 This projector cannot display anyVideo I S-Video / Y, PbICb, Pr/Cr Direct OperationMenu Operation Video Signal from Y, Pb/Cb, Pr/Cr Jacks Video Signal from Video Jack or S-VIDEO JackColor CustomNoise reduction ProgressiveWide RegularBlue back Power off? messageDisplay Set the Remote control in Setting Menu to Mode Remote controlTo return to the normal code Mode 1, operate both projector Returns to the normal code Mode Operating Wireless Mouse Installation Connection Not work properlyParticles, it will reduce the Cooling Fans’ Temperature Warning IndicatorAIR Filter Care and Cleaning Cover Lamp Replacement Monitor TimerCleaning ThE Projection Lens Top/Bottom Reversed Some displays are not Picture isSeen during No imageCabinet Net Weight Dimensions W x H x DPanel Resolution Signal Scanning FrequencyTerminal HDB1 5-PIN MAC AdapterTerminal DVI 24-pin Terminal Mini DIN 8-PINEiki Deutschland Gmbh