1Press the MENU button and the
2Press the POINT DOWN button and a
select and then press SELECT button.
Standard
Normal picture level preset on this projector. This picture level can be set by pressing the NORMAL button.
Cinema
Picture level adjusted for the picture with fine tone.
Custom
Picture level adjusted manually in the custom setting dialog box
When selecting “∀,” the custom setting dialog box will appear. Move the arrow to the item that you want to change by pressing the POINT UP/DOWN button, and adjust each value or change the setting On or Off by pressing the SELECT button to match with the image.
Color
Point to V button to lighten the image, and select A to deepen image. (From 0 to 63.)
Tint
Point to V button to increase purple, and select A to increase gre~ (From 0 to 63.)
White balance (Red I Green I Blue)
Move the arrow to the color that you want to adjust. Point to V lighten the color and select A to deepen the color. (From 0
to 63.)
Contrast
Point to V button to decrease contrast, and select A to increa contrast. (From 0 to 63.)
Brightness
Point to V button to darken the image, and select A to brighten image. (From 0 to 63.)
Sharpness
Point to V button to soften the image, and select A to sharpen image. (From 0 to 31.)
Noise reduction
Set “On” to reduce the noise (rough parts) of the image.
Progressive
Set “On” to provide progressive scan mode.
Each of the keys operates as follow.
Reset | Recalls the data previously adjusted. |
Stored .... Stores the data in the memory.
Quit . . Closes IMAGE MENU.
LC-XC1
NOTE : The Noise Reduction cannot be operated when the video signal is from the Y, Pb/Cb, Pr/Cr jacks.
The Progressive cannot be operated when “480p,” “575p,” “720p,” “1 035i,” “1
34