Eiki LC-XC1 LEFT/RIGHT buttons, and then press the Select button, Setting data in the memory

Page 30

LC-XC1

The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT.

1 Press the MENU button and the ON-SCREEN MENU appear. Press the POINT LEFT/RIGHT buttons to select

POSITION and press the SELECT button. Another dialog I

POSITION MENU will appear.

2 Select the arrow to the direction (described as #, ∃, %, or ⇪ that you want to adjust by pressing the POINT UP/DOV

LEFT/RIGHT buttons, and then press the SELECT button.

Each of the keys operates as follow.

Reset			Recalls the setting data previously set.
			the setting data in the memory.
Stores
			POSITION MENU.
Closes

Image 30

Contents Model LC-XC1 To the Owner Safety Instructions Compliances Table of Contents IBM-compatible and Macintosh computers up to Progressive scan signals and provide fine picture qualityProjector and computer with this Remote Control Unit only Color SystemsLC-XC1 Projector side AC Outlet side Positioning the Projector Room LightAdjustable Feet Latches on both sides of the projectorInput Terminals This projector uses a micro processor to control Reset function excessivelyWhen using the Wired / Wireless Refer toLC-XC1 LC-XC1 Indicators Laser Pointer Function Replace Compartment lidFlow of ON-SCREEN Menu Menu BAR Turning OFF the Projector Turn the Main on I OFF Switch to ON. The Lamp indicatorTurning on the Projector Appliance cannot be turned onLens Shift Adjustment Zoom AdjustmentFocus Adjustment Press the Zoom !/∀buttons on the Top Control or onPicture Freeze Function Keystone AdjustmentTimer function ∀button or the Point UP/DOWN buttons. PressDirect Operation Menu OperationAutomatic MULTI-SCAN System To set the Computer system manually, select the mode onNo signal System Menu will appearCompatible Computer Specifications Point UP/DOWN button and the Select button. To Reset Mode free Stored Quit Stores the adjusted data in the memory Recalls the data previously adjustedReset Closes Image MenuNormal Function Setting data in the memory LEFT/RIGHT buttons, and then press the Select buttonCloses Menu P24 ∀, SELECT, Right CLICK, or Point button. To adjustDisplayed. Correct the Keystone distortion by pressing This projector cannot display anyDirect Operation Menu OperationVideo I S-Video / Y, PbICb, Pr/Cr Video Signal from Video Jack or S-VIDEO Jack Video Signal from Y, Pb/Cb, Pr/Cr JacksNoise reduction CustomColor ProgressiveRegular WidePower off? message DisplayBlue back To return to the normal code Mode 1, operate both projector Remote controlSet the Remote control in Setting Menu to Mode Returns to the normal code ModeConnection InstallationOperating Wireless Mouse Not work properlyTemperature Warning Indicator AIR Filter Care and CleaningParticles, it will reduce the Cooling Fans’ Lamp Replacement Monitor Timer CoverCleaning ThE Projection Lens Seen during Picture isTop/Bottom Reversed Some displays are not No imageCabinet Panel Resolution Dimensions W x H x DNet Weight Signal Scanning FrequencyTerminal DVI 24-pin MAC AdapterTerminal HDB1 5-PIN Terminal Mini DIN 8-PINEiki Deutschland Gmbh

LC-XC1

LEFT/RIGHT buttons, and then press the SELECT button.

the setting data in the memory.

Closes