Eiki LC-XC1 owner manual Direct Operation, Menu Operation

Page 23

LC-XC1

DIRECT OPERATION

Press the VOLUME (+1—)button(s) on the Top Control or on the Remote Control Unit to adjust the volume. The Volume dialog box appears on the screen for a few seconds.

(+) button to increase the volume, and (—)button decreasing.

Press the MUTE button on the Remote Control Unit to cut oft the sound. To restore the sound to its previous level, press the MUTE button again or press Volume (+/—)

button(s).

MENU OPERATION

1 Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to select SOUND and press the SELECT button. Another dialog box SOUND MENU will appear.

2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to select by pressing the POINT UP/DOWN buttons.

Move the arrow to ! or ∀ of “Volume” by pressing the POINT UP/ DOWN buttons. To increase the volume, point the arrow to A and then press the SELECT button. To decrease the volume point the arrow to V and then press the SELECT button.

To cut off the audio sound, point the arrow to “Mute” and then press the SELECT button. The Mute display is changed On from Off and the sound is cut off. To restore the sound to its previous volume level, set the Mute to Off.

23

Image 23

Contents Model LC-XC1 To the Owner Safety Instructions Compliances Table of Contents Color Systems Progressive scan signals and provide fine picture qualityProjector and computer with this Remote Control Unit only IBM-compatible and Macintosh computers up toLC-XC1 Projector side AC Outlet side Room Light Positioning the ProjectorLatches on both sides of the projector Adjustable FeetInput Terminals Refer to Reset function excessivelyWhen using the Wired / Wireless This projector uses a micro processor to controlLC-XC1 LC-XC1 Indicators Laser Pointer Function Compartment lid ReplaceFlow of ON-SCREEN Menu Menu BAR Appliance cannot be turned on Turn the Main on I OFF Switch to ON. The Lamp indicatorTurning on the Projector Turning OFF the ProjectorPress the Zoom !/∀buttons on the Top Control or on Zoom AdjustmentFocus Adjustment Lens Shift Adjustment∀button or the Point UP/DOWN buttons. Press Keystone AdjustmentTimer function Picture Freeze FunctionMenu Operation Direct OperationSystem Menu will appear To set the Computer system manually, select the mode onNo signal Automatic MULTI-SCAN SystemCompatible Computer Specifications Point UP/DOWN button and the Select button. To Reset Mode free Stored Quit Closes Image Menu Recalls the data previously adjustedReset Stores the adjusted data in the memoryNormal Function Closes Setting data in the memoryLEFT/RIGHT buttons, and then press the Select button This projector cannot display any ∀, SELECT, Right CLICK, or Point button. To adjustDisplayed. Correct the Keystone distortion by pressing Menu P24Video I S-Video / Y, PbICb, Pr/Cr Direct OperationMenu Operation Video Signal from Y, Pb/Cb, Pr/Cr Jacks Video Signal from Video Jack or S-VIDEO JackProgressive CustomColor Noise reductionWide RegularBlue back Power off? messageDisplay Returns to the normal code Mode Remote controlSet the Remote control in Setting Menu to Mode To return to the normal code Mode 1, operate both projectorNot work properly InstallationOperating Wireless Mouse ConnectionParticles, it will reduce the Cooling Fans’ Temperature Warning IndicatorAIR Filter Care and Cleaning Cover Lamp Replacement Monitor TimerCleaning ThE Projection Lens No image Picture isTop/Bottom Reversed Some displays are not Seen duringCabinet Signal Scanning Frequency Dimensions W x H x DNet Weight Panel ResolutionTerminal Mini DIN 8-PIN MAC AdapterTerminal HDB1 5-PIN Terminal DVI 24-pinEiki Deutschland Gmbh