Eiki LC-XC1 owner manual Direct Operation, Menu Operation, Video I S-Video / Y, PbICb, Pr/Cr

Page 32

LC-XC1

DIRECT OPERATION

Select VIDEO mode by pressing the MODE button on the

Top Control or the VIDEO button on the Remote Control Unit.

MENU OPERATION

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button.

This projector automatically detects the signal from the VIDEO INPUT JACK(s) or the S-VIDEO INPUT JACK. When those jacks are connected at the same time, select the type of Video source in VIDEO SOURCE MENU.

1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select VIDEO SOURCE and press the SELECT button. Another

dialog box VIDEO SOURCE MENU will appear.

2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the source that you want to select, and then press the SELECT button.

Auto

The projector automatically detects the incoming Video source, and adjusts itself to optimize its performance.

•When both VIDEO jack and S-VIDEO jack are connected, the 5-VIDEO jack has priority over the VIDEO jack.

•When both Y-Pb/Cb-Pr/Cr jacks and S-VIDEO jack are

connected, the Y-Pb/Cb-Pr/Cr jacks have priority over the S-VIDEO jack.

Video I S-Video / Y, PbICb, Pr/Cr

When the VIDEO INPUT JACK(s) and the S-VIDEO INPUT JACK are connected at the same time, or if the projector cannot chose the proper video source, it is necessary to select a specific video source among Video, S-Video

and Y, Pb/Cb, Pr/Cr.

32

Image 32

Contents Model LC-XC1 To the Owner Safety Instructions Compliances Table of Contents Progressive scan signals and provide fine picture quality Projector and computer with this Remote Control Unit onlyIBM-compatible and Macintosh computers up to Color SystemsLC-XC1 Projector side AC Outlet side Positioning the Projector Room LightAdjustable Feet Latches on both sides of the projectorInput Terminals Reset function excessively When using the Wired / WirelessThis projector uses a micro processor to control Refer toLC-XC1 LC-XC1 Indicators Laser Pointer Function Replace Compartment lidFlow of ON-SCREEN Menu Menu BAR Turn the Main on I OFF Switch to ON. The Lamp indicator Turning on the ProjectorTurning OFF the Projector Appliance cannot be turned onZoom Adjustment Focus AdjustmentLens Shift Adjustment Press the Zoom !/∀buttons on the Top Control or onKeystone Adjustment Timer functionPicture Freeze Function ∀button or the Point UP/DOWN buttons. PressDirect Operation Menu OperationTo set the Computer system manually, select the mode on No signalAutomatic MULTI-SCAN System System Menu will appearCompatible Computer Specifications Point UP/DOWN button and the Select button. To Reset Mode free Stored Quit Recalls the data previously adjusted ResetStores the adjusted data in the memory Closes Image MenuNormal Function Closes Setting data in the memoryLEFT/RIGHT buttons, and then press the Select button ∀, SELECT, Right CLICK, or Point button. To adjust Displayed. Correct the Keystone distortion by pressingMenu P24 This projector cannot display anyVideo I S-Video / Y, PbICb, Pr/Cr Direct OperationMenu Operation Video Signal from Video Jack or S-VIDEO Jack Video Signal from Y, Pb/Cb, Pr/Cr JacksCustom ColorNoise reduction ProgressiveRegular WideBlue back Power off? messageDisplay Remote control Set the Remote control in Setting Menu to ModeTo return to the normal code Mode 1, operate both projector Returns to the normal code ModeInstallation Operating Wireless MouseConnection Not work properlyParticles, it will reduce the Cooling Fans’ Temperature Warning IndicatorAIR Filter Care and Cleaning Lamp Replacement Monitor Timer CoverCleaning ThE Projection Lens Picture is Top/Bottom Reversed Some displays are notSeen during No imageCabinet Dimensions W x H x D Net WeightPanel Resolution Signal Scanning FrequencyMAC Adapter Terminal HDB1 5-PINTerminal DVI 24-pin Terminal Mini DIN 8-PINEiki Deutschland Gmbh